Owners Manual
Installing the sensor board
1 Insert the sensor board into the slot on the display panel.
2 Connect the sensor board cable to the connector on the sensor board.
3 Ax the adhesive tape to secure the sensor board cable.
4 Tighten the screw to secure the sensor board to the display panel.
5 Install the:
adisplay cover
bdisplay assembly
cbattery
dbase cover
6 Follow the procedure in After working inside your computer.
Removing the display hinges
1 Follow the procedure in Before working inside your computer.
2 Remove the:
abase cover
bbattery
cdisplay assembly
ddisplay cover
esensor board
3 To remove the display hinges:
aRemove the screws that secure the display hinges to the display panel [1.[
bLift the display hinges away from the display panel [2.[
cRelease the display cable that routes under the display hinge [3.[
40