Owners Manual

Installing the base cover

1 Align the edges of the base cover with the computer and press until it clicks into place.

2 Tighten the screws to secure the base cover to the computer.

3 Follow the procedure in After working inside your computer.

Battery

Removing the battery

1 Follow the procedure in Before working inside your computer.

2 Remove the base cover.

3 To remove the battery:

a Disconnect the battery cable from the connector on the system board [1].

b Remove the screws that secure the battery to the computer [2].

c Lift the battery away from the computer [3].

Removing and installing components