Owners Manual

Installing the battery
1 Insert the battery into the slot on the computer.
2 Tighten the screws to secure the battery to the computer.
3 Connect the battery cable to the connector on the system board
4 Install the base cover.
5 Follow the procedure in After working inside your computer.
Power and volume control board
Removing the power and volume control board
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a base cover
b battery
c coin cell battery
3 To remove the power and volume control board:
a Peel the adhesive tape [1].
b Disconnect the power and volume control board cable from the connector on the system board [2].
c Release the cables from the placeholders [3].
d Remove the screw that secures the power and volume control board to the computer [4].
16
Removing and installing components