Owners Manual

Installing the LED board

1 Insert the LED board into the slot on the computer.

2 Affix the adhesive tape to secure the LED board to the computer.

3 Affix the LED board cable and connect the LED board cable to the connector.

4 Install the:

a battery

b base cover

5 Follow the procedure in After working inside your computer.

Input/Output(I/O) board

Removing the Input/Output (I/O) board

1 Follow the procedure in Before working inside your computer.

2 Remove the:

a base cover

b battery

3 To remove the I/O board:

a Peel the adhesive tape to access the I/O board cable [1].

b Lift the latch and disconnect the I/O board cable from the I/O board [2].

c Disconnect the coin cell battery and power and volume button board cables from the I/O board [3].

d Remove the screw that secures the I/O board to the computer [4].

e Lift the I/O board away from the computer [5].

Removing and installing components