Owners Manual

Power connector port

Removing the power connector port

1 Follow the procedure in Before working inside your computer.

2 Remove the:

a base cover

b battery

3 To remove the power connector port:

a Disconnect the power connector port cable from the connector on the system board [1].

b Remove the screw that secures the power connector port to the computer [2].

c Lift the power connector port away from the computer [3].

Installing the power connector port

1 Insert the power connector port into the slot on the computer.

2 Tighten the screw to secure the power connector port to the computer.

3 Connect the power connector port cable to the connector on the system board.

Removing and installing components