Owners Manual

a Using a plastic scribe, pry the display cover from the edges to release it from the display assembly [1].

b Lift the display cover away from the display assembly [2].

c Release the display cable and touch screen board cable from under the display hinge [3].

Installing the display cover

1 Route the display cable and touch screen board cable to the display hinge.

2 Place the display cover on the display assembly and press along the edges to secure it.

3 Install the:

a display assembly

b battery

c base cover

4 Follow the procedure in After working inside your computer.

eDP cable

Removing the display cable

1 Follow the procedure in Before working inside your computer.

2 Remove the:

Removing and installing components