Owners Manual

a base cover

b battery

c display assembly

d display cover

3 To remove the display cable:

a Peel the adhesive tapes [1] [2].

b Disconnect the sensor board cable from the display panel [3].

c Open the latch and disconnect the display cable from the display panel [4].

d Lift the display cable away from the display panel [5].

e Release the display cable from the routing channels [6].

Installing the display cable

1 Route the display cable through the placeholders on the display panel.

2 Align the display cable along the routing channels on the display panel.

3 Connect the display cable and sensor board cable to the connectors on the display panel.

4 Affix the adhesive tapes to secure the display cable and sensor board cable.

5 Install the:

a display cover

b display assembly

Removing and installing components