Owners Manual

Installing the sensor board

1 Insert the sensor board into the slot on the display panel.

2 Connect the sensor board cable to the connector on the sensor board.

3 Affix the adhesive tape to secure the sensor board cable.

4 Tighten the screw to secure the sensor board to the display panel.

5 Install the:

a display cover

b display assembly

c battery

d base cover

6 Follow the procedure in After working inside your computer.

Display hinges

Removing the display hinges

1 Follow the procedure in Before working inside your computer.

2 Remove the:

a base cover

b battery

c display assembly

d display cover

e sensor board

3 To remove the display hinges:

a Remove the screws that secure the display hinges to the display panel [1].

b Lift the display hinges away from the display panel [2].

c Release the display cable that routes under the display hinge [3].

Removing and installing components