Owners Manual

Installing the display hinges

1 Route the display cable to the display hinge.

2 Place the display hinges on both sides of the display panel.

3 Tighten the screws to secure the display hinges to the display panel.

4 Install the:

a sensor board

b display cover

c display assembly

d battery

e base cover

5 Follow the procedure in After working inside your computer.

Camera

Removing the camera

1 Follow the procedure in Before working inside your computer.

2 Remove the:

a base cover

b battery

c display assembly

d display cover

3 To remove the camera:

a Using a plastic scribe, release the camera module from the display panel [1] [2].

b Disconnect the camera cable from the camera module [3].

Removing and installing components