Owners Manual

Table 28. System Configuration (continued)
Option Description
Keyboard Backlight Timeout on
AC
Allows you to set the timeout value for the keyboard backlight when an AC adaptor is
plugged into the system:
● 5 seconds
● 10 seconds (enabled by default)
● 15 seconds
● 30 seconds
● 1 minute
● 5 minutes
● 15 minutes
● Never
Keyboard Backlight Timeout on
Battery
Allows you to set the timeout value for the keyboard backlight when the system is running
only on battery power:
● 5 seconds
● 10 seconds (enabled by default)
● 15 seconds
● 30 seconds
● 1 minute
● 5 minutes
● 15 minutes
● Never
Video
Option
Description
LCD Brightness Allows you to set the display brightness depending up on the power source—On Battery and On AC. The
LCD brightness is independent for battery and AC adapter. It can be set using the slider.
EcoPower(enabled by default)
Security
Table 29. Security
Option Description
Enable Admin Setup Lockout
OFF(enabled by default)
Password Bypass This option lets you bypass the System (Boot) Password and the internal hard drive
password prompts during a system restart.
● Disabled — Always prompt for the system and internal hard drive password when they
are set. This option is enabled by default.
● Reboot Bypass — Bypass the password prompts on Restarts (warm boots).
NOTE: The system will always prompt for the system and internal hard drive passwords
when powered on from the off state (a cold boot). Also, the system will always prompt
for passwords on any module bay hard drives that may be present.
Non-Admin Password Change This option lets you determine whether changes to the System and Hard Disk passwords are
permitted when an administrator password is set.
Allow Non-Admin Password Changes - This option is enabled by default.
Non-Admin Setup Changes Determines whether changes to the setup option are permitted when an administrator
password is set.
System setup 23