Owners Manual

Installing the Base Cover

1. Align the edges of the base cover on the computer and press it on the computer until it snaps in place.

2. Tighten the screws to secure the base cover to the computer.

3. Install the battery.

4. Follow the procedures in After Working Inside Your Computer.

Removing the Memory

1. Follow the procedures in Before Working On Your Computer.

2. Remove the:

a. battery

b. base cover

3. Perform the following steps to remove the memory module(s) from the computer:

a. Pry the retention clips away from the memory module(s) until the memory module(s) pop-up.

b. Remove the memory module(s) from the computer.

Installing the Memory

1. Insert the memory module into the memory socket and press until the memory module click in to place.

2. Install the:

a. base cover

b. battery

3. Follow the procedures in After Working Inside Your Computer.

Removing the Keyboard Trim

1. Follow the procedures in Before Working Inside Your Computer.

2. Pry up the keyboard trim starting from the bottom and work your way along the top edge.