Owners Manual

NOTE: Disconnecting the power cable is optional. For easy removal of the system fan, it is recommended to

disconnect the power cable.

c. Remove the screws that secure the system fan to the computer. Lift the system fan away from the computer.

Installing the System Fan

1. Perform the following steps to install the system fan:

a. Place the system fan in its slot on the computer.

b. Connect the system-fan cable and power cable to the system board.

c. Tighten the screws to secure the system fan to the computer.

d. Route the power cable to its holder in the computer.

2. Install the:

a. battery

b. base cover

3. Follow the procedures in After Working Inside Your Computer.