Owners Manual

Option Description
Wireless Radio Control Allows you to control the WLAN and WWAN radio. The options are:
• Control WLAN radio
• Control WWAN radio
Default Setting: both the options are disabled.
Wake on LAN/WLAN This option allows the computer to power up from the off state when triggered by a special
LAN signal. Wake-up from the Standby state is unaffected by this setting and must be enabled
in the operating system. This feature only works when the computer is connected to AC power
supply.
• Disabled – Does not allow the system to power on by special LAN signals when it receives
a wake-up signal from the LAN or wireless LAN. (Default Setting)
• LAN Only - Allows the system to be powered on by special LAN signals.
• WLAN Only
• LAN or WLAN
• LAN with PXE Boot
Block Sleep Allows you to block the computer from entering into the sleep state. Option is disabled by
default.
• Block Sleep (S3)
Peak Shift Peak Shift minimizes AC power usage at times of peak demand. Option is disabled by default.
Advance Battery Charge
Configuration
Advanced Battery Charge minimizes battery health while still supporting heavy use during the
work day. Option is disabled by default.
Primary Battery Charge
Configuration
Allows you to change the battery charge configuration.
• Adaptive (Default setting)
• Standard
• ExpressCharge
• Primarily AC Use
• Custom
NOTE: Battery settings may not be available for all battery types. To enable this
option ‘Advanced Battery Charge Mode’ must be disabled.
Intel Smart Connect
Technology
This feature allows your system to periodically sense nearby wireless connections while the
system is asleep.
Default Setting: Enabled
Table 9. POST Behavior
Option Description
Adapter Warnings Allows you to activate the adapter warning messages when certain power adapters are used.
The option is enabled by default.
• Enable Adapter Warnings
Keypad Allows you to choose one of two methods to enable the keypad that is embedded in the
internal keyboard.
• Fn Key Only (Default Setting)
• By Numlock
Numlock Enable Allows you to enable the Numlock when system boots. The option is enabled by default.
Fn Key Emulation Allows you to match the <Scroll Lock> key feature of PS-2 keyboard with the <Fn> key feature
in an internal keyboard. The option is enabled by default.
35