Owners Manual

Steps

1. Follow the procedure in Before working inside your computer.

2. Remove the:

a. base cover

b. battery

c. display assembly

3. To release the display panel:

a. Using a plastic scribe, pry the display cover from the edges to release it from the display assembly [1]

b. Lift the display cover away from the display assembly [2].

NOTE: Apply pressure uniformly in all sides of the display cover to avoid damaging the clips.

c. Release the display cable and touch screen board cable from under the display hinge [3].

4. Lift and remove the display pane from the system.

Installing the display panel

Steps

1. Route the display cable and touch screen board cable to the display hinge.

2. Place the display panel on the display back cover assembly and press along the edges to secure it.

3. Install the:

a. display assembly

b. battery

c. base cover

4. Follow the procedure in After working inside your computer.

Removing and installing components