Owners Manual

Option Description
NOTE: You must set the admin password before you set the system or hard drive password. Deleting
the admin password automatically deletes the system password and the hard drive password.
NOTE: Successful password changes take effect immediately.
Default setting: Not set
System
Password
Allows you to set, change or delete the system password.
NOTE: Successful password changes take effect immediately.
Default setting: Not set
Internal HDD-1
Password
Allows you to set, change or delete the system’s internal hard drive’s password.
Default setting: Not set
Strong Password Allows you to enforce the option to always set strong passwords.
Default Setting: Enable Strong Password is not selected.
NOTE: If Strong Password is enabled, Admin and System passwords must contain at least one
uppercase character, one lowercase character and be at least 8 characters long.
Password
Configuration
Allows you to determine the minimum and maximum length of Administrator and System passwords.
Password Bypass Allows you to enable or disable the permission to bypass the System and the Internal HDD password,
when they are set. The options are:
● Disabled
● Reboot bypass
Default setting: Disabled
Password
Change
Allows you to enable the disable permission to the System and Hard Drive passwords when the admin
password is set.
Default setting: Allow Non-Admin Password Changes is selected.
UEFI Capsule
Firmware
Updates
Allows you to control whether the system allows BIOS updates through UEFI capsule update packages.
Default setting: Enable UEFI Capsule Firmware Updates is selected.
PTT Security Allows you to control whether the Platform Trust Technology (PTT) feature is visible to the operating
system. The options are:
● PTT On
● Clear
Default setting: PTT On is selected.
NOTE: Disabling this option does not change any settings made to the PTT, delete, or change any
information or keys stored in the PTT. Changes made to this setting take effect immediately.
Computrace Allows you to activate or disable the optional Computrace software The options are:
● Deactivate
● Disable
● Activate
NOTE: The Activate and Disable options will permanently activate or disable the feature and no
further changes will be allowed
Default setting: Deactivate
CPU XD Support Allows you to enable the Execute Disable mode of the processor.
Enable CPU XD Support (default)
70 System Setup