Owners Manual

Next steps

1. Replace the base cover

2. Replace the SD memory card

3. Follow the procedure in after working inside your computer

Hard drive

Removing the hard drive assembly

Prerequisites

1. Follow the procedure in before working inside your computer

2. Remove the SD memory card

3. Remove the base cover

4. Disconnect the battery cable.

Steps

1. Disconnect the hard drive cable from the system board [1].

2. Peel the tape that secures the hard drive cable to the system board [2].

3. Remove the four (M2x4.5) screws that secure the hard drive assembly to the palmrest and keyboard assembly [1].

4. Lift the hard drive from the slot on the palmrest and keyboard assembly [2].

Removing and installing components