Owners Manual

5. Follow the procedures in After working inside your computer.

WLAN card

Removing the WLAN card

Prerequisites

1. Follow the procedure in before working inside your computer

2. Remove the SD memory card

3. Remove the base cover

4. Disconnect the battery cable.

Steps

1. Remove the single (M2x3) screw that secures the WLAN card bracket to the system board [1].

2. Slide and remove the WLAN card bracket that secures the WLAN cables [2].

3. Disconnect the WLAN cables from the connectors on the WLAN card [3].

4. Lift the WLAN card away from the connector [4].

Removing and installing components