Owners Manual

Next steps

1. Replace the battery

2. Replace the base cover

3. Replace the SD memory card

4. Follow the procedure in after working inside your computer

Power-button board

Removing the power button board with optional fingerprint reader

Prerequisites

1. Follow the procedure in before working inside your computer.

2. Remove the SD memory card.

3. Remove the base cover.

4. Remove the battery.

5. Remove the system fan.

6. Remove the display assembly.

Steps

1. Open the latch, and disconnect the power button board cable and fingerprint cable from the system [1].

2. Unroute the cables from the palmrest and keyboard assembly [2].

3. Peel the conductive tape off the power button board [3].

Removing and installing components