Owners Manual

Next steps

1. Replace the display assembly.

2. Replace the heatsink.

3. Replace the system fan.

4. Replace the SSD.

5. Replace the Memory.

6. Replace the WLAN.

7. Replace the battery.

8. Replace the base cover.

9. Replace the SD memory card.

10. Follow the procedure in after working inside your computer.

Display assembly

Removing the display assembly

Prerequisites

1. Follow the procedure in before working inside your computer.

2. Remove the SD memory card.

3. Remove the base cover.

4. Remove the battery.

5. Remove the WLAN.

Steps

1. Peel off the tape securing the wireless antenna from the system board [1].

2. Disconnect the display cable from the connector on the system board [2, 3].

Removing and installing components