Owners Manual

Neste trinn

1. Sett på bunndekselet.

2. Sett inn SD-minnekortet

3. Følg fremgangsmåten i etter at du har arbeidet inne i datamaskinen.

Harddisk

Removing the hard drive assembly

Prerequisites

1. Follow the procedure in before working inside your computer

2. Remove the SD memory card

3. Remove the base cover

4. Disconnect the battery cable.

Steps

1. Disconnect the hard drive cable from the system board [1].

2. Peel the tape that secures the hard drive cable to the system board [2].

3. Remove the four (M2x4.5) screws that secure the hard drive assembly to the palmrest and keyboard assembly [1].

4. Lift the hard drive from the slot on the palmrest and keyboard assembly [2].

Ta ut og installere komponenter