Owners Manual

Neste trinn

1. Sett inn WLAN

2. Sett inn batteriet

3. Sett på bunndekselet.

4. Sett inn SD-minnekortet

5. Følg fremgangsmåten i etter at du har arbeidet inne i datamaskinen.

Kamera

Removing the camera

Prerequisites

1. Follow the procedure in before working inside your computer

2. Remove the SD memory card

3. Remove the base cover

4. Remove the battery

5. Remove the WLAN

6. Remove the display assembly

7. Remove the display bezel

8. Remove the display panel

Steps

1. Using a plastic scribe, gently pry the camera off the display back-cover [1].

2. Disconnect the camera cable from the camera module [2].

3. Lift the camera module from the display back-cover [3].

Ta ut og installere komponenter