Owners Manual

Table Of Contents
Passos seguintes
1. Volte a colocar o painel do ecrã
2. Volte a colocar a moldura do ecrã
3. Volte a colocar o conjunto do ecrã
4. Volte a colocar a WLAN
5. Volte a colocar a bateria
6. Volte a colocar a tampa da base
7. Volte a colocar a placa de memória SD
8. Siga o procedimento indicado em Após efetuar qualquer procedimento no interior do computador
Porta do transformador de corrente
Removing the power adapter port
Prerequisites
1. Follow the procedure in before working inside your computer
2. Remove the SD memory card
3. Remove the base cover
4. Remove the battery
5. Remove the WLAN
Steps
1. Disconnect and route the power adapter cable from the system board [1, 2].
2. Remove the single (M2x3) screw that secures the power adapter port to the palmrest and keyboard assembly [3].
3. Lift the power adapter port, along with its cable, off the palmrest and keyboard assembly [4].
Retirar e instalar componentes
95