Owners Manual
Table Of Contents
- Dell Latitude 3400 Service Manual
- Manipulace uvnitř počítače
- Technologie a součásti
- Major components of your system
- Demontáž a instalace součástí
- Recommended tools
- Karta SD (Secure Digital)
- Spodní kryt
- Baterie
- Pevný disk
- Deska I/O
- Dotyková podložka
- paměťové moduly,
- SIM Card
- Karta WLAN
- Disk SSD / paměťový modul Intel Optane
- Removing the M.2 2280 Solid-state drive or Intel Optane memory—Optional
- Installing the M.2 2280 Solid-state drive or Intel Optane memory - Optional
- Removing the M.2 Solid-state drive bracket
- Installing the Solid-state drive bracket
- Removing the M.2 2230 Solid-state drive
- Installing the M.2 2230 Solid-state drive
- Reproduktory
- Systémový ventilátor
- Chladič
- Rozbočovací deska VGA
- Deska vypínače
- Základní deska
- Sestava displeje
- Čelní kryt displeje
- Panel displeje
- Kabel displeje
- Port napájecího adaptéru
- Kamera
- Sestava opěrky pro dlaň a klávesnice
- Recommended tools
- Troubleshooting
- Získání pomoci
Next steps
1. Replace the battery cable.
2. Replace the base cover
3. Replace the SD memory card
4. Follow the procedure in after working inside your computer
Deska I/O
Removing the IO board
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the SD memory card.
3. Remove the base cover.
4. Remove the battery.
5. Remove the hard drive assembly.
NOTE:
Required for systems with 42 Whr battery
Steps
1.
NOTE:
Removing the I/O board also removes the coin-cell battery which resets the CMOS settings.
Open the latch and disconnect the I/O board cable from the system board [1].
2. Peel the I/O-board cable from the palm rest and keyboard assembly [2].
3. Remove the two (M2x3) screws that secure the I/O board to the palm rest and keyboard assembly [1].
4. Lift the I/O board, along with the cable, off the palm rest and keyboard assembly [2].
Demontáž a instalace součástí
27