Owners Manual

Option Description
• Wake on AC
This option is not set by default.
Auto On Time
Allows you to set the time at which the computer must turn on automatically.
The options are:
• Disabled—Default
• Every Day
• Weekdays
• Select Days
This option is not set by default.
Peak Shift
Allows you to block entering to sleep in operating system environment.
Battery Charge
Configuration
Allows you to select the charging mode for the battery.
The options are:
• Adaptive—Default
• Standard - Fully charges your battery at a standard rate.
• ExpressCharge- The battery charges over a shorter period using Dell’s fast charging technology.
• Primarily AC use
• Custom
If Custom Charge is selected, you can also configure Custom Charge Start and Custom Charge Stop.
NOTE: All charging mode may not be available for all the batteries. To enable this option,
disable the Advanced Battery Charge Configuration option.
Enable Advanced Battery
Charge Configuration
This option enables you to maximize the battery health. By enabling this option, your system uses the
standard charging algorithm and other techniques, during the nonwork hours to improve the battery
health.
Block Sleep
This option minimizes AC power usage at times of peak demand.
Wake on LAN/WLAN
This option allows the computer to power up from the off state when triggered by a special LAN signal.
Wake-up from the Standby state is unaffected by this setting and must be enabled in the operating
system. This feature only works when the computer is connected to AC power supply.
• Disabled—Default - Does not allow the system to power on by special LAN signals when it receives
a wake-up signal from the LAN or wireless LAN.
• LAN Only - Allows the system to be powered on by special LAN signals.
Enable USB Wake Support
Allows you to enable USB devices to wake the system from standby.
• Enable USB Wake Support
This option is not set by default.
Wake on Dell USB-C Dock
When Wake on Dell USB-C Dock is enabled, connecting a Dell USB-C Dock will wake the system from
Standby.
Wireless Radio Control
If enabled, this feature sense the connection of the system to a wired network and subsequently disable
the selected wireless radios.
• Control WLAN radio
• Control WWAN radio
Intel Speed Shift
Technology
Allows you to enable or disable the Intel Speed Shift Technology.
• Enabled—Default
Force Lpm And Aspm Off
Force SATA/USB low-power mode and Active State Power Management (ASPM) off in manufacturing
mode.
System setup 31