Owners Manual

Installing the hard drive assembly

1 Replace the hard drive assembly into the slot on the computer.

2 Connect the hard drive assembly cable to the connector on the system board.

3 Tighten the screws to secure the hard drive assembly to the computer.

4 Install the:

a battery

b base cover

5 Follow the procedure in After Working Inside Your computer.

Removing the hard drive bracket

1 Follow the procedure in Before Working Inside Your Computer.

2 Remove the:

a battery

b base cover

c hard drive assembly

3 To remove the hard drive bracket:

a Remove the screws to release the hard drive bracket from the hard drive assembly [1].

b Remove the hard drive from the hard drive bracket [2].

c Disconnect the hard drive cable from the hard drive [3].

Removing and installing components