Owners Manual

Installing the hard drive bracket

1 Connect the hard drive cable to the connector on the hard drive.

2 Place the hard drive brackets on the hard drive to align with the screw holders on both sides of the hard drive.

3 Tighten the screws to secure the hard drive bracket to the hard drive.

4 Install the:

a hard drive assembly

b base cover

c battery

5 Follow the procedure in After Working Inside Your computer.

Removing the WLAN card

1 Follow the procedure in Before Working Inside Your Computer.

2 Remove the:

a battery

b base cover

3 To remove the WLAN card:

a Loosen the captive screw [1] to remove the metal tab from the WLAN card [2].

b Disconnect the WLAN cables from the WLAN card [3].

c Using a plastic scribe, release the WLAN card from the computer [4].

d Disconnect the WLAN card from the connector to remove it [5].

Installing the WLAN card

1 Connect the WLAN card to the connector on the system board.

2 Connect the WLAN antenna cables to the connectors on the WLAN card.

3 Place the metal tab to align it with the screw holder on the WLAN card to secure the WLAN cables.

4 Tighten the captive screw to secure the WLAN card to the computer.

5 Install:

a base cover

b battery

6 Follow the procedure in After Working Inside Your computer.

Removing and installing components