Owners Manual

Removing the memory module
1 Follow the procedure in Before Working Inside Your Computer.
2 Remove the:
a battery
b base cover
3 To remove the memory module:
a Release the retention clips away from the memory module until the memory module pops up [1].
b Disconnect the memory module from the connector to remove it from the computer [2].
Installing the memory module
1 Insert the memory module into the connector and press until the memory module clicks into the place.
2 Install the:
a base cover
b battery
3 Follow the procedure in After Working Inside Your computer.
Removing the palmrest
1 Follow the procedure in Before Working Inside Your Computer.
2 Remove the:
a battery
b base cover
c hard drive assembly
d keyboard
3 Remove the screws that secure the palmrest to the computer.
Removing and installing components
13