Owners Manual

4 To remove the palmrest:
a Open the display and release the latch to disconnect the power button, nger print reader, touchpad, and LED cables from the
connectors on the system board [1, 2].
b Remove the screws that secure the palmrest to the computer [3].
c Using a plastic scribe, release the palmrest from the edges and remove it from the computer [4].
Installing the palmrest
1 Place the palmrest on the computer and press along all the sides until it clicks in place.
2 Connect the power button, nger print reader, touchpad, and LED cables to the connectors on the system board.
3 Flip the computer and tighten the screws to secure the palmrest to the computer.
4 Install the:
a keyboard
b hard drive assembly
c base cover
d battery
5 Follow the procedure in After Working Inside Your computer.
Removing the coin cell battery
1 Follow the procedure in Before Working Inside Your Computer.
2 Remove the:
a battery
b base cover
14
Removing and installing components