Owners Manual

3 To remove the camera:

a Disconnect the camera cable from the connector on the display assembly [1].

b Lift and remove the camera from the display assembly [2].

Installing the camera

1 Insert the camera into the slot on the display assembly.

2 Connect the camera cable to the connector on the display assembly.

3 Install the:

a display bezel

b display assembly

c power connector port

d system board

e system fan

f display cable

g palmrest

h keyboard

i memory

j WLAN card

k hard drive assembly

l base cover

m battery

4 Follow the procedure in After Working Inside Your computer.

Removing the display panel

1 Follow the procedure in Before Working Inside Your Computer.

2 Remove the:

a battery

b base cover

c hard drive assembly

d WLAN card

e memory

f keyboard

g palmrest

h display cable

i system fan

j system board

Removing and installing components