Operation Manual

Installing the coincell battery

1 Place the coin cell into the slot on the system board.

2 Connect the battery cable to the system board.

3 Install the:

a battery

b base cover

4 Follow the procedure in After working inside your computer

Heat sink

Removing the heatsink

1 Follow the procedure in Before working inside your computer.

2 Remove the:

a base cover

b battery

3 To remove the heatsink:

a Loosen the 4 captive screws in the order shown on the heatsink [1], and then remove another 3 screws [2] to release the

heatsink.

Disassembly and reassembly