Operation Manual

Installing the LCD Panel

1 Connect the LCD cable to its connector on the back side of the LCD panel.

2 Ax the adhesive sticker.

3 Place the LCD panel on the LCD back cover and align the LCD panel with the screw holders on the LCD back cover.

4 Replace the 4 M2x2 screws to secure the LCD panel to the LCD back cover.

5 Route the eDP cable through the routing channel and secure the cable to the display panel with an adhesive tape.

6 Install the:

a LCD bezel

b display assembly

c Installing the WWAN card

d Installing the WLAN card

e battery

f base cover

7 Follow the procedure in After working inside your computer

LCD Hinge

Removing the LCD hinge

1 Follow the procedure in Before working inside your computer.

2 Remove the:

a base cover

b WLAN card

c WWAN card

d display assembly

Disassembly and reassembly