Operation Manual

a base cover

b WLAN card

c WWAN card

d display assembly

e LCD bezel

f LCD panel

3 Remove the adhesive tapes that secure the camera and the eDP cable [1].

4 Remove the screws securing the right bracket to the LCD back cover [2] and lift the bracket away from the LCD back cover [3].

5 Disconnect the camera cable from its connector on the LCD back cover [4].

6 Unroute the cable from the routing clips on the LCD back cover, release it from the adhesive tapes that secure the cable to back

cover.

Disassembly and reassembly