Operation Manual

Installing the eDP and camera cable

1 Route the display cable through its routing channel and secure the display cable to the LCD back cover with the adhesive tapes.

2 Connect the camera cable to its connector on the LCD back cover.

3 Replace the screws to secure the right hinge bracket to the LCD back cover.

4 Secure the eDP cable to the LCD back cover with adhesive tapes.

5 Install the:

a LCD panel

b LCD bezel

c display assembly

d Installing the WWAN card

e Installing the WLAN card

f battery

g base cover

6 Follow the procedure in After working inside your computer

System board

Removing system board

1 Follow the procedure in Before working inside your computer.

2 Remove the:

a base cover

b battery

c WLAN card

d WWAN card

Disassembly and reassembly