Operation Manual
Data Rates 10/100/1000 Mbps
Controller bus architecture PCI-e V1.1x1
Power consumption (full operation per data rate connection speed) 1000 Mbps: 828 mW
100 Mbps: 441.77 mW
10 Mbps: 387.94 mW
Power consumption (standby operation)
WOL Disabled: 10mW (Disabled using driver)
No Link (w/ WOL): 51.89 mW (cable Disconnect)
10 Mbps Idle (w/ WOL): 68 mW
100 Mbps Idle (w/ WOL): 176 mW
IEEE standards compliance 802.3, 802.3ab, 802.3u, 802.az
Boot ROM Support Support boot from PXE option ROM
Network Transfer Rate
Full duplex at 10, 100, or 1000 Mbps and
Half duplex at 10 or 100 Mbps.
Operating Temp/Storage Temp 0C to70C/-55C to 125C
Operating Humidity 30°C / 60% RH (Level 3)
Operating System Driver support Linux, Win7, Win10
Manageability WOL, PXE
Wireless communications
Table 6. Qualcomm QCA9377 802.11ac MU-MIMO Dual Band (1x1) Wi-Fi + Bluetooth 4.1 LE M.2 Wireless Card
Attribute Specication
Host interface
M.2 2230 form factor (WiFi– PCIe, Bluetooth – USB)
Network standard
802.11a, 802.11b, 802.11g, 802.11n and 802.11ac
11ac Wave2 feature MU-MIMO RX
Wi-Fi Alliance Certications
802.11a, 802.11b, 802.11g, WPA, WPA2, WMM, 11ac, Wi-Direct,
WMM-Power Save, WiProtected Setup, Voice-Personal
Operating Frequency Bands
2.4 GHz (802.11b/g/n) and 5 GHz (802.11a/n/ac)
Dual Diversity Antenna Switching Dual diversity antenna switching for systems designed with main
and auxiliary antennas
Data Rate
802.11ac – Up to 433 Mbps; 802.11n - Up to 150 Mbps; 802.11a/g -
Up to 54 Mbps
802.11b - Up to 11 Mbps
Receive Sensitivity
802.11ac: -59 dBm@ 433.3 Mbps
802.11n/a: -65 dBm@ 150 Mbps ; -68 dBm @ 72.2Mbps
Technical specications 61