Latitude 3590 Vlasnički priručnik Regulativni model: P75F Regulativna vrsta: P75F001
Napomene, oprezi i upozorenja NAPOMENA: NAPOMENA ukazuje na važne informacije koje vam pomažu da koristite svoje računalo na bolji način. OPREZ: MJERA OPREZA označava moguće oštećenje hardvera ili gubitak podataka i otkriva kako izbjeći te probleme. UPOZORENJE: UPOZORENJE označava moguće oštećenje imovine, osobne ozljede ili smrt. © 2018. Dell Inc. ili njegove podružnice. Sva prava pridržana. Dell, EMC i drugi zaštitni znakovi vlasništvo su tvrtke Dell Inc. ili njezinih podružnica.
Sadržaj 1 Radovi na vašem računalu...............................................................................................................................7 Mjere opreza....................................................................................................................................................................... 7 Napajanje u stanju pripravnosti...................................................................................................................................
Zvučnici............................................................................................................................................................................. 26 Uklanjanje zvučnika....................................................................................................................................................26 Ugradnja zvučnika............................................................................................................................................
Ugradnja matične ploče.............................................................................................................................................54 Oslonac za ruku............................................................................................................................................................... 55 Uklanjanje oslonca za ruku........................................................................................................................................
Opcije zaslona za sigurnost............................................................................................................................................ 80 Opcije zaslona za sigurno podizanje sustava................................................................................................................ 82 Opcije zaslona Intel proširenja softvera za zaštitu.......................................................................................................
1 Radovi na vašem računalu Teme: • Mjere opreza • Prije radova na unutrašnjosti računala • Nakon rada na unutrašnjosti računala Mjere opreza U poglavlju o mjerama opreza navedeni su glavni koraci koje treba poduzeti prije bilo kakvog rastavljanja. Prije bilo kakvog sastavljanja ili rastavljanja primijenite sljedeće mjere opreza: • Isključite sustav i sve priključene periferne uređaje. • Odspojite sustav i sve periferne uređaje od AC napajanja.
Zbog povećane gustoće poluvodiča upotrijebljenih u novim proizvodima tvrtke Dell, osjetljivost na statički elektricitet veća je nego kod njezinih starijih proizvoda. Stoga više nisu primjenjivi neki prethodno odobreni načini rukovanja dijelovima. Dvije priznate vrste oštećenja statičkim elektricitetom su katastrofalni i povremeni kvarovi. • • Katastrofalni – ovi kvarovi obuhvaćaju oko 20 posto kvarova povezanih sa statičkim elektricitetom. Oštećenje uzrokuje neposredan i potpuni gubitak funkcije uređaja.
izvornoj kutiji u kojoj je novi dio isporučen. Uređaje osjetljive na statički elektricitet treba izvaditi iz ambalaže samo na radnoj površini zaštićenoj od statičkog elektriciteta, a dijelovi se ne smiju stavljati na antistatičku vrećicu jer je samo njezina unutrašnjost zaštićena. Dijelove uvijek stavite na dlan, antistatički podložak, u sustav ili u antistatičku vrećicu.
OPREZ: Kako biste izbjegli oštećivanje računala, koristite isključivo bateriju namijenjenu za dotično Dell računalo. Nemojte koristiti baterije koje su namijenjene za druga Dell računala. 1 Ponovno postavite bateriju. 2 Ponovno postavite poklopac kućišta. 3 Priključite sve vanjske uređaje, kao što je replikator ulaza ili medijska baza i ponovno postavite sve kartice, kao što je ExpressCard. 4 Priključite sve telefonske ili mrežne kabele na svoje računalo.
2 Uklanjanje i instaliranje komponenti Ovaj odjeljak pruža detaljne informacije o tome kako ukloniti ili instalirati komponente s vašeg računala. Preporučeni alati Za izvršavanje postupaka iz ovog dokumenta možda će vam trebati slijedeći alati: • Križni #0 odvijač • Križni #1 odvijač • plastično šilo NAPOMENA: Odvijač #0 je za vijke 0–1, a odvijač #1 za vijke 2–4 Popis veličina vijaka Tablica 1.
Matična ploča za naslon za dlanove Gumb za uključivanje/ isključivanje za naslon za dlanove 1 1 Ploča napajanja za oslonac 1 za dlanove VGA ploča za oslonac za dlanove 2 WWAN ploča za oslonac za dlanove 2 IO ploča za oslonac za dlanove 1 Nosač šarke Lijevi + Desni za oslonac za dlanove 6 HDD nosač za oslonac za dlanove 4 VENTILATOR za oslonac za dlanove 3 Baterija za oslonac za dlanove 5 WLAN modul za matičnu ploču 1 WWAN modul za WWAN ploču 1 SSD za oslonac za dlanove FP NOSAČ za oslon
3 Umetnite vrh spajalice u rupu na utoru SIM ladice i zatim izvucite i uklonite SIM ladicu . Ugradnja SIM ladice – WWAN modeli 1 Poravnajte i gurnite SIM ladicu natrag u utor SIM ladice. 2 Zatvorite poklopac utora SIM kartice. 3 Slijedite upute u odlomku Nakon rada na unutrašnjosti računala. SD kartica – opcija SD kartica je opcijska komponenta. SD karticu ćete vidjeti samo u sustavima isporučenima s WWAN karticom.
Ugradnja SD kartica – WWAN modeli 1 Gurajte SD karticu u njen utor dok ne sjedne uz karakteristični zvuk. 2 Slijedite upute u odlomku Nakon rada na unutrašnjosti računala. Poklopac kućišta Uklanjanje poklopca kućišta 1 Slijedite upute u odlomku Prije rada na unutrašnjosti računala. 2 Uklanjanje SIM ladice (WWAN modeli). 3 Za uklanjanje poklopca kućišta: a Otpustite 10 pričvrsnih vijaka M2,5 kojima je poklopac kućišta pričvršćen na računalo .
4 Odvojite poklopac kućišta od računala [2].
Ugradnja maske kućišta 1 Poravnajte poklopac kućišta s otvorima za vijke na računalu. 2 Pritisnite rubove poklopca sve dok ne klikne na mjesto. 3 Stegnite 10 M2,5 vijaka kako biste pričvrstili poklopac kućišta za računalo. 4 Ugradite SIM ladicu (WWAN modeli). 5 Slijedite upute u odlomku Nakon rada na unutrašnjosti računala. Baterija Uklanjanje baterije 1 Slijedite postupke u poglavlju Prije rada na unutrašnjosti računala.
Ugradnja baterije 1 Umertnite bateriju u utor na računalu. 2 Ponovno postavite 5 M2x3 vijaka kako biste pričvrstili bateriju za računalo. 3 Priključite kabel baterije u priključak na matičnoj ploči. 4 Ugradite: NAPOMENA: Baterija s 3 ćelije ima samo 3 vijka. a b 5 poklopac kućišta SIM ladica (WWAN modeli) Slijedite upute u odlomku Nakon rada na unutrašnjosti računala. WLAN kartica Uklanjanje WLAN kartice 1 Slijedite postupke u poglavlju Prije rada na unutrašnjosti računala.
Ugradnja WLAN kartice 1 Umetnite WLAN karticu u njezin priključak na matičnoj ploči. 2 Gurnite antenske kabele ispod lijeve šarke zaslona i spojite antenske kabele u WLAN karticu. 3 Vratite držač WLAN kartice na WLAN karticu. 4 Stegnite M2x3 vijak i pričvrstite WLAN karticu i držač kartice za matičnu ploču. 5 Ugradite: a b 6 baterija poklopac kućišta Slijedite upute u odlomku Nakon rada na unutrašnjosti računala.
c Uklonite WWAN karticu iz njezinog priključka na matičnoj ploči [4]. Ugradnja WWAN kartice 1 Umetnite WWAN karticu u njezin priključak na matičnoj ploči. 2 Priključite dva antenske kabela u WWAN karticu. 3 Ponovno postavite metalni nosač na WWAN karticu. 4 Pritegnite vijak M2xL3 kako biste pričvrstili WWAN karticu i nosač na matičnu ploču. 5 Ugradite: a b 6 baterija poklopac kućišta Slijedite upute u odlomku Nakon rada na unutrašnjosti računala.
Ugradnja VGA ploče 1 Postavite VGA ploču u njen utor na sustavu. 2 Vratite dva M2x3 vijka koji pričvršćuju VGA ploču za sustav. 3 Priključite kabel pomoćne VGA ploče u pomoćnu VGA ploče. 4 Ugradite: a b 5 baterija poklopac kućišta Slijedite upute u odlomku Nakon rada na unutrašnjosti računala.
Memorijski modul Uklanjanje memorijskog modula 1 Slijedite postupke u poglavlju Prije rada na unutrašnjosti računala. 2 Uklonite: a b 3 poklopac kućišta baterija Za uklanjanje memorijskog modula: a b Razdvojite pričvrsnice memorijskog modula [1]. Podignite i uklonite memorijski modul s matične ploče [2]. Ugradnja memorijskog modula 1 Gurajte memorijski modul u priključak pod kutom od 30 stupnjeva dok kontakti potpuno ne sjednu u utor. Zatim pritišćite memorijski modul dok ga spajalice ne pričvrste.
Tvrdi pogon Uklanjanje pogona tvrdog diska 1 Slijedite postupke u poglavlju Prije rada na unutrašnjosti računala. 2 Uklonite: a b 3 poklopac kućišta baterija Za uklanjanje pogona tvrdog diska (HDD): 22 a Isključite HDD kabel iz matične ploče . b c Uklonite 4 vijka M3x3 koji pričvršćuju HDD na oslonac za ruku [1]. Podignite HDD iz računala [2].
4 Odspojite međudio kabela HDD-a. 5 Zatim uklonite vijke M3xL3 kako biste odvojili nosač od HDD-a.
6 Podignite nosač tvrdog diska s tvrdog diska. Ugradnja pogona tvrdog diska 1 Stegnite M3x3 vijke koji pričvršćuju nosač za HDD. 2 Priključite umetak HDD kabela. 3 Umetnite HDD karticu u priključak na računalu. 4 Stegnite 4 M3x3 vijka i pričvrstite HDD za računalo. 5 Priključite kabel HDD kartice na matičnu ploču.
6 Ugradite: a b 7 baterija poklopac kućišta Slijedite upute u odlomku Nakon rada na unutrašnjosti računala. SATA SSD pogon Uklanjanje SSD kartice 1 Slijedite postupke u poglavlju Prije rada na unutrašnjosti računala. 2 Uklonite: a b 3 poklopac kućišta baterija Za uklanjanje kartice pogona čvrstog stanja (SSD): a b Uklonite dva vijak koji pričvršćuju nosač SSD-a za sustav [1] i podignite nosač sa sustava [2]. Gurnite i podignite SSD iz sustava [3].
3 Ugradite: a b 4 baterija poklopac kućišta Slijedite upute u odlomku Nakon rada na unutrašnjosti računala. Zvučnici Uklanjanje zvučnika 1 Slijedite postupke u poglavlju Prije rada na unutrašnjosti računala. 2 Uklonite: a b c 3 Za uklanjanje zvučnika: a b c 4 poklopac kućišta baterija SSD Isključite kabel zvučnika iz priključka na matičnoj ploči [1]. Uklonite ljepljivu traku koja drži kabel zvučnika za računalo [2]. Izvucite kabel zvučnika iz usmjernog kanala na kućištu [3].
Ugradnja zvučnika 1 Postavite zvučnike uz utore na računalu. 2 Ljepljivom trakom pričvrstite kabel zvučnika za računalo. 3 Provucite kabel zvučnika kroz usmjerni kanal. 4 Priključite kabel zvučnika na priključak na matičnoj ploči. 5 Ugradite: a b c 6 SSD baterija poklopac kućišta Slijedite upute u odlomku Nakon rada na unutrašnjosti računala. baterija na matičnoj ploči Uklanjanje baterije na matičnoj ploči 1 Slijedite postupke u poglavlju Prije rada na unutrašnjosti računala.
Ugradnja baterije na matičnoj ploči 1 Postavite bateriju na matičnoj ploči u utor na matičnoj ploči. 2 Priključite kabel baterije na matičnu ploču. 3 Ugradite: a b 4 baterija poklopac kućišta Slijedite upute u odlomku Nakon rada na unutrašnjosti računala. Sklop hladila procesora Uklanjanje sklopa hladila 1 Slijedite postupke u poglavlju Prije rada na unutrašnjosti računala.
b Podignite sklop hladila van iz računala. Ugradnja sklopa hladila 1 Umetnite hladilu u utor na računalu. 2 Stegnite M2,5x2,5 vijke i vratite tri M2x3 vijka koji pričvršćuju hladilu za računalo.
NAPOMENA: Stegnite vijke hladila prema redoslijedu označenom na samom hladilu. 3 Ugradite: a b 4 baterija poklopac kućišta Slijedite upute u odlomku Nakon rada na unutrašnjosti računala. Ventilator sustava Uklanjanje ventilatora sustava 1 Slijedite postupke u poglavlju Prije rada na unutrašnjosti računala. 2 Uklonite: a b 3 poklopac kućišta baterija Za uklanjanje ventilatora sustava: 30 a Izvucite eDP kabel iz usmjernog kanala na ventilatoru sustava [1].
Ugradnja ventilatora sustava 1 Postavite ventilator na računalo. 2 Stegnite 3 M2,5 x 5 vijka kako biste pričvrstili ventilator za računalo. 3 Priključite kabel ventilatora na matičnu ploču. 4 Provucite kabel eDP kroz njegov usmjerni kanal na ventilatoru sustava. 5 Ugradite: a b 6 baterija poklopac kućišta Slijedite upute u odlomku Nakon rada na unutrašnjosti računala. Ulazno-izlazna ploča Uklanjanje ulazno-izlazne ploče 1 Slijedite postupke u poglavlju Prije rada na unutrašnjosti računala.
4 Uklonite vijak M2x4 koji drži I/O ploču [1] za sustavi podignite ju van iz sustava [2].
Ugradnja ulazno-izlazne ploče 1 Postavite ulazno-izlaznu (I/O) ploču u odgovarajući utor na osloncu za ruku. 2 Vratite M2x4 vijk i pričvrstite I/O ploču za oslonac za ruku. 3 Spojite kabel I/O ploče u njezin priključak na matičnoj ploči. 4 Ugradite: a b 5 baterija poklopac kućišta Slijedite upute u odlomku Nakon rada na unutrašnjosti računala. Čitač otiska prsta – opcija Uklanjanje čitača otisaka prstiju 1 Slijedite postupke u poglavlju Prije rada na unutrašnjosti računala.
c 34 Podignite čitač otisaka prstiju iz računala.
Ugradnja čitača otisaka prstiju 1 Postavite čitača otiska prsta u utor na osloncu za ruku. 2 Ponovno postavite metalni nosač na čitač otiska prsta i vratite vijak kojim ćete pričvrstiti čitač za sustav. 3 Zalijepite kabel s ljepljivom pozadinom za oslonac za ruku. 4 Priključite kabel čitač otisaka prstiju u priključak na matičnoj ploči. 5 Ugradite: a b c 6 I/O ploču baterija poklopac kućišta Slijedite upute u odlomku Nakon rada na unutrašnjosti računala.
7 Uklonite četiri M2x2 vijka koji pričvršćuju podlogu osjetljivu na dodir za računalo [1] i podignite podlogu osjetljivu na dodir sa sustava [2]. Ugradnja podloge osjetljive na dodir 1 Stavite podlogu osjetljivu na dodir u utor na računalu i ponovno pričvrstite četiri vijka M2x2 da bi ju pričvrstili za sustav. 2 Priključite kabele podloge osjetljive na dodir i pozadinskog osvjetljenja tipkovnice u odgovarajuće priključke na računalu.
3 Zalijepite samoljepljivu traku koja pričvršćuje podlogu osjetljivu na dodir na sustav. 4 Poravnajte i stavite metalni nosač ispod plastičnog držača. 5 Ponovno zategnite dva vijka M2x2 koja pričvršćuju metalni nosač zaslona na podlogu osjetljivu na dodir. 6 Ugradite: a b 7 baterija poklopac kućišta Slijedite upute u odlomku Nakon rada na unutrašnjosti računala. Sklop zaslona Uklanjanje sklopa zaslona 1 Slijedite postupke u poglavlju Prije rada na unutrašnjosti računala.
OPREZ: Čvrsto držite sustav kad je stavljen u ovaj položaj. 8 Uklonite 6 vijaka M2,5x2,5 [a] i podignite sklop zaslona dalje od računala [2]. OPREZ: Čvrsto držite sklop zaslona kad ga stavite na naslon za dlanove pod kutom od 90 stupnjeva da bi izbjegli oštećenje sklopa.
Ugradnja sklopa zaslona 1 Stavite sklop zaslona na naslon za dlanove pod kutom od 90 stupnjeva i poravnajte ga s držačima vijaka na naslonu za dlanove. NAPOMENA: Čvrsto držite sklop zaslona kad ga stavite na naslon za dlanove pod kutom od 90 stupnjeva da bi izbjegli oštećenje sklopa. 2 Pritegnite 6 vijaka M2,5x2,5 koji pričvršćuju sklop zaslona na računalo. 3 Preokrenite računalo. 4 Provedite WLAN kabele kroz kanal za usmjeravanje.
Utičnica napajanja Uklanjanje ulaza napajanja 1 Slijedite postupke u poglavlju Prije rada na unutrašnjosti računala. 2 Uklonite: a b c d 3 poklopac kućišta Uklanjanje WLAN kartice Uklanjanje WWAN kartice sklop zaslona Da bi uklonili ulaz napajanja: a b c d Isključite kabel napajanja iz priključka na matičnoj ploči [1]. Izvucite kabel napajanja iz usmjerne spojnice na sustavu [2]. Odvijte vijak M2.5x3 kojim je utičnica napajanja pričvršćen na oslonac za dlanove [3].
a b c d e 6 sklop zaslona WLAN WWAN baterija poklopac kućišta Slijedite upute u odlomku Nakon rada na unutrašnjosti računala. Ploča s gumbom za uključivanje/isključivanje Uklanjanje ploče gumba za uključivanje/isključivanje 1 Slijedite postupke u poglavlju Prije rada na unutrašnjosti računala.
Ugradnja ploče gumba za uključivanje/isključivanje 1 Postavite ploču s gumbom za uključivanje u pripadajući utor. 2 Stegnite M2x2 vijak koji pričvršćuje ploču s gumbom za uključivanje za sustav. 3 Zalijepite ljepljivu traku kako biste za sustav pričvrstili ploču s gumbom za uključivanje. 4 Za sustav pričvrstite kabel ploče s gumbom za uključivanje s ljepljivom pozadinom, a zatim spojite kabel u odgovarajući priključak na matičnoj ploči.
Ugradnja okvira LCD-a 1 Ponovno postavite okvir i nježno pritisnite rubove kako bi okvir sjeo na mjesto. 2 Ugradite: a b c d e 3 sklop zaslona Ugradnja WWAN kartice Ugradnja WLAN kartice baterija poklopac kućišta Slijedite upute u odlomku Nakon rada na unutrašnjosti računala. Kamera Uklanjanje kamere 1 Slijedite postupke u poglavlju Prije rada na unutrašnjosti računala.
Ugradnja kamere 1 Postavite kameru na stražnji poklopac LCD-a. 2 Priključite kabel kamere na njegov priključak. 3 Zalijepite trake i pričvrstite kameru za stražnji poklopac LCD-a. 4 Ugradite: a b c d e f 5 Okvir LCD-a sklop zaslona WWAN WLAN baterija poklopac kućišta Slijedite upute u odlomku Nakon rada na unutrašnjosti računala. LCD ploča Uklanjanje LCD zaslona 1 Slijedite postupke u poglavlju Prije rada na unutrašnjosti računala.
a b c d e poklopac kućišta WLAN kartica WWAN karticu sklop zaslona Okvir LCD-a 3 Ogulite ljepljivu traku koja drži LCD zaslon za stražnju masku LCD-a [1]. 4 Uklonite četiri vijka M2x2 koji drže LCD zaslon za stražnju masku LCD-a [2] i okrenite ga na drugu stranu da bi otkrili priključak eDP kabela [3]. 5 Podignite ljepljivu naljepnicu da bi otkrili LCD konektor [1], a zatim uklonite konektor sa zaslona [2,3].
Ugradnja LCD ploče 1 Priključite LCD kabel u priključak na poleđini LCD ploče. 2 Zalijepite ljepljivu naljepnicu. 3 Postavite LCD ploču na stražnji poklopac LCD-a i poravnajte LCD ploču s držačima vijaka na stražnjem poklopcu LCD-a. 4 Ponovno postavite 4 M2x2 vijka koji LCD ploču pričvršćuju za stražnji poklopac LCD-a. 5 Provedite eDP kabel kroz usmjerni kanal i pričvrstite kabel za ploču zaslona koristeći ljepljivu traku.
e f Okvir LCD-a LCD ploča 3 Uklonite 8 vijaka M2,5x2,5i 2 vijka M2x2 koji drže metalne nosače za stražnju masku LCD-a [1]. 4 Uklonite šarku LCD-a iz sustava [2]. Ugradnja šarke LCD-a 1 Postavite lijevi i desni nosač šarke na stražnji poklopac LCD-a, poravnajte sa jezičcima za zaključavanje na bočnoj strani stražnjeg poklopca LCD-a. 2 Stegnite vijaka kako biste pričvrstili lijevi i desni nosač šarke za stražnji poklopac LCD-a.
a b c d e f poklopac kućišta WLAN kartica WWAN karticu sklop zaslona Okvir LCD-a LCD ploča 3 Uklonite ljepljive trake koje drže kameru i eDP kabel [1]. 4 Uklonite vijke koji drže desni nosač za stražnju masku LCD-a [2] i podignite nosač sa stražnje maske LCD-a [3]. 5 Isključite kabel kamere iz njegovih priključaka na stražnjoj maski LCD-a [4]. 6 Izvadite kabel iz stezaljki za usmjeravanje na stražnjoj maski LCD-a, odvojite ju od ljepljivih vrpci koje drže kabel za stražnju masku.
Ugradnja kabela eDP i kabela kamere 1 Provucite kabel zaslona kroz odgovarajući usmjerni kanal i pričvrstite kabel zaslona za stražnji poklopac LCD-a koristeći ljepljive trake. 2 Spojite kabel kamere u odgovarajući priključak na stražnjem poklopcu LCD-a. 3 Vratite vijaka i pričvrstite desni nosač šarke za stražnji poklopac LCD-a. 4 Pričvrstite kabel eDP za stražnji poklopac LCD-a koristeći ljepljive trake.
e 3 Isključite sljedeće kabele i priključke: a b c d e 4 sklop zaslona VGA kabel [1] Izvucite VGA kabel iz usmjernog kanala [2] kabel pogona tvrdog diska [3] Priključak kabela zvučnika [4] Kabel DC napajanja [5] Isključite sljedeće kabele: a b c d e 50 Kabel ploče s gumbom za uključivanje [1] I/O kabel [2] Kabel podloge osjetljive na dodir [3] Kabel pozadinskog osvjetljenja tipkovnice [4] Kabel tipkovnice [5] Uklanjanje i instaliranje komponenti
5 Uklonite M2x4 vijak koji pričvršćuje matičnu ploču za sustav.
• 52 Za sustav isporučene sa WWAN karticom i senzorom otiska prsta: 1 Pažljivo podignite desnu stranu matične ploče i preokrenite je. 2 Isključite FPC pomoćne WWAN ploče [1] i kabel pomoćne VGA ploče [2] iz priključaka na donjoj strani matične ploče. 3 Podignite matičnu ploču iz sustava.
• 7 Za ostale konfiguracije, podignite matičnu ploču. Uklonite vijak koji pričvršćuje USB nosač tipa-C za matičnu ploču [1] i podignite USB nosač tipa-C s matične ploče [2].
Ugradnja matične ploče 1 Spojite WWAN kabel i kabel čitača otiska prsta u priključke na donjoj strani matične ploče. NAPOMENA: Ovaj korak odnosi se samo za sustave isporučene s WWAN karticom i čitačem otiska prsta. 2 Poravnajte matičnu ploču s držačima vijaka na računalu. 3 Stegnite M2 x 4 vijak koji pričvršćuje matičnu ploču za računalo. 4 U odgovarajuće priključke spojite ploču gumba za uključivanje, I/O, ploču osjetljivu na dodir, pozadinsko osvjetljenje tipkovnice i kabele tipkovnice.
Oslonac za ruku Uklanjanje oslonca za ruku 1 Slijedite postupke u poglavlju Prije rada na unutrašnjosti računala. 2 Uklonite: a b c d e f g h i j k l m n o poklopac kućišta baterija hladilo ventilator WLAN kartica WWAN karticu memorijski modul HDD Utičnica napajanja I/O ploču baterija na matičnoj ploči zvučnici podloga osjetljiva na dodir sklop zaslona matična ploča NAPOMENA: Preostala komponenta je oslonac za dlanove. 3 Ugradite sljedeće komponente na novu oslonac za dlanove.
e f g h i j k l m n o 4 baterija na matičnoj ploči I/O ploču Utičnica napajanja memorijski modul WWAN karticu WLAN kartica HDD ventilator hladilo baterija poklopac kućišta Slijedite upute u odlomku Nakon rada na unutrašnjosti računala.
3 Tehničke specifikacije NAPOMENA: Ponude se mogu razlikovati po regijama. Za više informacija vezano za konfiguraciju računala: • Na sustavu Windows 10 kliknite ili dotaknite Start > Settings (Postavke) > System (Sustav) > About (O sustavu).
Memorija Vaše računalo podržava maksimalno 32 GB memorije kada koristite dva 16 GB DIMM-a; međutim, 32-bitni operativni sustav, kao što je 32bitna verzija Microsoft Windowsa 10, može koristiti najviše 4 GB adresnog prostora. Nadalje, određene komponente u računalo trebaju oko 4 GB adresnog prostora. Sav adresni prostor koji je rezerviran za te komponente ne može se koristiti od strane memorije računala; stoga će količina memorije dostupne za 32-bitne operativne sustav biti manja od 4 GB.
Video specifikacije Tablica 3. Tablica prikazuje video specifikacije Funkcija Specifikacija Tip Integrirana na matičnu ploču, s hardverskim ubrzanjem Upravljački uređaj UMA : • • Sky Lake: Intel HD Graphics 520 Kaby Lake: Intel HD Graphics 610\620, Intel UHD Graphics 620 Diskretno: • Podržava vanjski zaslon AMD Radeon 530 VGA, HDMI 1.4 Specifikacije web kamere U ovoj temi navedene su detaljne specifikacije kamere. Jednostavna daljinska suradnja: • Videokonferencija online uz ugrađenu kameru.
Brzine prijenosa podataka 10/100/1000 Mb/s Arhitektura sabirnice kontrolera PCI-e V1,1x1 Potrošnja struje (puni radni obujam po brzini prijenosa podataka) 1000 Mb/s: 828 mW 100 Mb/s: 441,77 mW 10 Mb/s: 387,94 mW Potrošnja struje (stanje pripravnosti) WOL onemogućen: 10 mW (onemogućen pomoću upravljačkog programa) Nema veze (w/ WOL): 51,89 mW (kabel odspojen) 10 Mb/s u mirovanju (w/ WOL): 68 mW 100 Mb/s u mirovanju (w/ WOL): 176 mW Usklađenost sa standardima IEEE 802.3, 802.3ab, 802.3u, 802.
Atribut Specifikacija 802.11g/a: -72 dBm@ 54 Mb/s 802.11b: -85 dBm@ 11 Mb/s Security (Sigurnost) Otvoreno, Dijeljeno, WPA, WPA-PSK, WPA2, WPA2-PSK Autentifikacija EAP-TLS, EAP-TTLS (MSCHAPv2), PEAPv0(EAP-MS-CHAPv2) EAP metode Klijentski uslužni program Microsoft podrška za UI za ugrađeni Wi-Fi i Bluetooth Radio uklj./isklj. Hardversko i softversko uklj./isklj. onemogućava prijenos i primanje kako bi se zadovoljili zahtjevi ograničenja za vrijeme leta Roaming Nesmetan roaming između 802.11a, 802.
Atribut Specifikacija Dual Diversity prebacivanje antene Dual diversity prebacivanje antene za sustave projektirane s glavnim i pomoćnim antenama 2x2 MIMO rad u načinu rada 802.11n s 2x2 ili većom pristupnom točkom Brzina prijenosa podataka 802.11ac – do 867 Mb/s; 802.11n - do 450 Mb/s; 802.11a/g - do 54 Mb/s 802.11b - do 11 Mb/s Osjetljivost primanja 802.11ac: -59 dBm@ 400 Mb/s; - 57dBm @ 866,7 Mb/s 802.11n/a: -67 dBm@ 300 Mb/s ; -70 dBm @ 144,4 Mb/s 802.11g/a: -75 dBm@ 54 Mb/s 802.
Tablica 8. Intel® Dual Band Wireless - AC 8265 802.11AC 2x2 Wi-Fi + BT 4.2 LE M.2 bežična kartica Atribut Specifikacija Sučelje glavnog računala M.2 2230 faktor oblika (WiFi– PCIe, Bluetooth – USB) Standard mreže IEEE 802.11a/b/g/n/ac MU-MIMO RX Wi-Fi Alliance certifikati 802.
Atribut Specifikacija Temperatura Radna temperatura 0° do +50° C (puna izvedba na zaštitnim temperaturama do 80° C) Temperatura pohrane od –40° do +70° C Vlažnost Do 90% RV bez kondenzacije (na temperaturama od 25° C do 35° C) Tablica 9.
Operater Generički Kina / Indonezija Pričuvna brzina HSPA+ 42 Mb/s HSPA+ 42 Mb/s Frekvencijski pojasevi Opseg 1, 2, 3, 4, 5, 8, HSPA+ Opseg 1, 2, 3, 4, 5, 8, HSPA+ SIM Da Da LTE/WWAN antena Glavna (Tx/Rx) + pomoćna (Rx/GNSS) Glavna (Tx/Rx) + pomoćna (Rx/GNSS) Podrška operativnog sustava Windows 8.1, 32/64 bita Windows 8.
Tablica 12.
Fn + F8 Prebacivanje prikaza (Win + P) Fn + F9 Pretraži Fn + F10 Pojačava pozadinsko osvjetljenje tipkovnice Fn + F11 Povećanje osvjetljenja Fn + F12 Smanjenje osvjetljenja Fn + Printscreen Wireless (Bežično) • Primarno ponašanje su tipke F1 – F12; sekundarno ponašanje su medijske tipke. • Fn Lock uključuje samo primarno i sekundarno ponašanje na F1 – F12 • F7 će se ponašati na isti način jer nema sekundarnog ponašanja Podloga osjetljiva na dodir Tablica 14.
Specifikacije baterije U ovoj temi su navedene detaljne specifikacije baterije. Tablica 16.
Izlazna struja 3,34 A (stalno) 3,34 A (stalno) Nazivni izlazni napon 19,5 VDC 19,5 VDC Težina (kg): 0,23 0,29 Dimenzije (V x Š x D inča) 1,1 x 1,9 x 4,3 1,1 x 1,9 x 4,3 Dimenzije (V x Š x D mm) 28 x 47 x 108 28 x 47 x 108 Raspon temperatura: 0° do 40°C 0° do 40°C Radna 32° do 104°F 32° do 104°F Skladištenje -40° do 70°C -40° do 70°C -40° do 158°F -40° do 158°F Dimenzije sustava U ovoj temi detaljno su navedene dimenzije računala.
4 Tehnologija i komponente Ovo poglavlje navodi tehnologiju i komponente dostupne u sustavu. Teme: • DDR4 • USB značajke • HDMI 1.4 • USB vrsta C DDR4 Memorija DDR4 (Double Data Rate Fourth Generation = dvostruka brzina podataka četvrte generacije) brži je nasljednik tehnologija DDR2 i DDR3 te omogućuje kapacitet do 512 GB, u usporedbi s maksimalno 128 GB po DIMM-u za DDR3.
Slika 2. Razlika u debljini Zakrivljeni rub Moduli DDR4 imaju zakrivljeni rub koji pomaže pri umetanju i smanjuje opterećenja PCB-a tijekom ugradnje memorije. Slika 3. Zakrivljeni rub Memorijske pogreške Memorijske pogreške na sustavu prikazuju novu šifru kvara UKLJUČENO-TREPERENJE-TREPERENJE ili UKLJUČENO-TREPERENJEUKLJUČENO. Ako dođe do kvara cjelokupne memorije, LCD se ne uključuje.
• • • • Nove značajke upravljanja napajanjem Puni dupli prijenos podataka i podrška novim vrstama prijenosa Kompatibilnost s USB 2.0 Novi priključci i kabeli Temama u nastavku obuhvaćena su najčešće postavljana pitanja u vezi USB 3.0/USB 3.1 Gen 1 standarda. Brzina Trenutno su najnovijim specifikacijama za USB 3.0/USB 3.1 Gen 1 definirana 3 načina brzine. To su Super-Speed, Hi-Speed i Full-Speed. Novi način SuperSpeed ima brzinu prijenosa od 4,8 Gbps.
bila ograničavajuća, 5 Gbps više nego obećava. Uz obećanu brzinu od 4,8 Gbps, taj će se standard naći i u nekim proizvodima koji ranije nisu bili dio USB svijeta, poput eksternih RAID sustava za pohranu. U nastavku su navedeni neki od dostupnih SuperSpeed USB 3.0/USB 3.1 Gen 1 proizvoda: • Vanjska radna površina USB 3.0/USB 3.1 Gen 1 tvrdih diskova • Prijenosni USB 3.0/USB 3.1 Gen 1 tvrdi diskovi • USB 3.0/USB 3.1 Gen 1 priključne stanice i adapteri • USB 3.0/USB 3.
• 3D - Definira ulaz/izlaz protokole za glavne 3D video formate, utirući put za pravo 3D igranje i 3D kućne aplikacije • Vrsta sadržaja - Signaliziranje vrste sadržaja u stvarnom vremenu između zaslona i uređaja izvora, omogućavanje TV za optimizaciju postavki slike na temelju vrste sadržaja • Dodatni prostor za boju - dodaje podršku za dodatne modele boja koji se koriste u fotografijama i računalnoj grafici.
samo oblik priključka, ali tehnologija s kojom radi može biti USB 2 ili USB 3.0. Zapravo, N1 Android tablet tvrtke Nokia koristi USB priključak vrste C, ali tehnologija koju koristi je USB 2.0 – nije čak ni USB 3.0. Međutim, te su tehnologije međusobno tijesno povezane.
5 Opcije programa za postavljanje sustava NAPOMENA: Ovisno o računalu i instaliranim uređajima, stavke navedene u ovom odjeljku možda će se prikazati, a možda i neće.
• SATA tvrdi pogon (ako postoji) • Dijagnostike NAPOMENA: Odabir dijagnostika prikazuje zaslon ePSA dijagnostike. Zaslon za podizanje sustava također prikazuje opciju pristupa zaslonu programa za postavljanje sustava. Navigacijske tipke NAPOMENA: Za većinu opcija programa za postavljanje sustava promjene koje izvršite su zabilježene no nemaju učinak dok ponovno ne pokrenete sustav. Tipke Navigacija Strelica gore Vraća se na prethodno polje. Strelica dolje Pomiče se na sljedeće polje.
Mogućnost Opis System Information Ovaj odlomak navodi primarne značajke hardvera vašeg računala. • Podaci o sustavu: prikazuju se verzija BIOS-a, oznaka za uslugu, oznaka sredstva, oznaka vlasništva, datum vlasništva, datum proizvodnje i kôd za brzu uslugu.
Mogućnost Opis • M.2 PCIe SSD-0 (zadana postavka) SMART Reporting Kontrolira jesu li pogreške tvrdog pogona za ugrađene pogone prijavljene tijekom podizanja sustava. Opcija ‘Enable Smart Reporting’ (Omogući pametno izvješćivanje) nije odabrana po zadanoj postavci. USB Configuration Ovo je opcionalna značajka. Ovo polje konfigurira ugrađeni USB kontroler.
Mogućnost Opis Keyboard Backlight Timeout on Battery Ova funkcija definira vrijednost isteka vremena za pozadinsko osvjetljenje tipkovnice kada sustav radi samo na napajanje baterije. Opcije su: • 5 seconds (5 sekunda) • 10 seconds (10 sekundi, zadano) • 15 seconds (15 sekunda) • 30 seconds (30 sekunda) • 1 minute (1 minuta) • 5 minutes (5 minuta) • 15 minutes (15 minuta) • Never (Nikad) Touchscreen Određuje je li dodirni zaslon omogućen ili onemogućen.
Mogućnost Opis Zadana postavka: Not Set (Nije postavljeno) Internal HDD-0 Password Omogućuje postavljanje, promjenu ili brisanje zaporke administratora. NAPOMENA: Uspješne promjene zaporke odmah stupaju na snagu. Zadana postavka: Not Set (Nije postavljeno) Strong Password Omogućuje vam da uključite opciju da uvijek postavljate jake zaporke. Zadana postavka: Nije odabrana opcija Enable Strong Password (Omogući jaku zaporku).
Mogućnost Opis NAPOMENA: Za nadogradnju ili spuštanje na raniju verziju TPM 2.0 preuzmite TPM wrapper alat (softver). Computrace Omogućuje vam aktivaciju ili deaktivaciju opcionalnog Computrace softvera. Opcije su: • Deactivate (Deaktiviraj) • Disable (Onemogući) • Aktiviraj – omogućeno po zadanoj postavci NAPOMENA: Opcije Activate (Aktiviraj), Deactivate (Dekativiraj) i Disable (Onemogući) trajno aktiviraju i onemogućavanje funkciju i daljnje promjene neće biti dopuštene.
Mogućnost Opis • Zamijeni iz datoteka - Zamjenjuje trenutačni ključ s ključem iz datoteke koju je odabrao korisnik • Dodaj iz datoteka - Dodaje ključ u trenutačnu bazu podataka iz datoteke koju je odabrao korisnik • Obriši - Briše odabrani ključ • Ponovno postavlja sve ključeve - Ponovno postavlja zadanu postavku • Briše sve ključeve - Briše sve ključeve NAPOMENA: Ako onemogućite Prilagođeni način rada, sve promjene bit će obrisane, a ključevi će se vratiti na zadane postavke.
Mogućnost Opis Intel TurboBoost Omogućuje vam da omogućite ili onemogućite Intel TurboBoost način rada procesora. • Omogućuje Intel TurboBoost Zadana postavka: opcija je omogućena. HyperThread Omogućuje ili onemogućuje HyperThreading u procesoru. • Omogućeno — zadano • Disabled (Onemogućeno) Opcije zaslona za upravljanje napajanjem Mogućnost Opis AC Behavior Omogućuje vam da omogućite ili onemogućite automatsko uključivanje računalo računala kada je priključen AC adapter.
Mogućnost Block Sleep Opis • Disabled (Onemogućeno) (zadano) • Samo LAN • Samo WLAN • LAN or WLAN (LAN ili WLAN) • LAN with PXE Boot (LAN pomoću PXE podizanja) Ova opcija omogućuje vam ulaz u spavanje (stanje S3) u okruženju operacijskog sustava. Blokiraje stanja spavanja (S3 stanje) Zadana postavka: Opcija je onemogućena Peak Shift Ova opcija omogućuje vam da minimizirate potrošnju izmjenične struje u dijelovima dana kad je potrošnja najveća.
Mogućnost Opis Fn Lock Options Omogućuje da kombinacija prečaca Fn + Esc označi primarno ponašanje F1 – F12, između standardnih i sekundarnih funkcija. Ako onemogućite tu opciju, nećete moći dinamički mijenjati primarno ponašanje tih tipaka.
Mogućnost Wireless Device Enable Opis • Bluetooth — omogućeno po zadanoj postavci • GPS (on WWAN Module) (GPS (Na WWAN modulu))— omogućeno po zadanoj postavci Omogućuje vam da omogućite ili onemogućite unutarnje bežične uređaje. • WLAN • Bluetooth • WWAN/GPS Sve opcije su prema zadanom omogućene. Opcije zaslona za održavanje Mogućnost Opis Service Tag Prikazuje servisnu oznaku vašeg računala.
Mogućnost Opis • ISKLJUČENO • 1 • 2 (zadano) • 3 Razlučivost sustava SupportAssist Mogućnost Opis Auto OS Recovery Threshold Opcija postavljanja praga automatskog vraćanja operativnog sustava kontrolira tok automatskog podizanja za konzolu sustava SupportAssist i alata za vraćanje operativnog sustava tvrtke Dell.
Ažuriranje BIOS-a vašeg sustava putem USB izbrisivog memorijskog pogona Ako sustav ne može učitati operativni sustav Windows, no još uvijek postoji potreba za ažuriranjem BIOS-a, preuzmite datoteku BIOS-a putem drugog sustava te ju spremite na USB izbrisivi memorijski pogon za podizanje sustava. NAPOMENA: Morat ćete upotrijebiti USB izbrisivi memorijski pogon za podizanje sustava. Više detalja potražite u sljedećem članku: http://www.dell.
NAPOMENA: Značajka Zaporka sustava i postavljanja je onemogućena. Pridruživanje zaporke sustava i zaporke postavljanja Možete pridružiti novu System Password (Zaporku sustava) samo kad je status Not Set (Nije postavljeno). Za ulaz u program za postavljanje sustava pritisnite F2 odmah nakon uključivanja ili ponovnog podizanja sustava. 1 U zaslonu System BIOS (BIOS sustava) ili System Setup (Programa za postavljanje sustava), odaberite Security (Sigurnost) i pritisnite Enter.
6 Softver Ovo poglavlje sadrži podržane operativne sustave i upute za instalaciju upravljačkih programa. Teme: • Konfiguracije operativnog sustava • Preuzimanje upravljačkih programa Konfiguracije operativnog sustava Ova tema prikazuje operativne sustave koje podržava Tablica 20. Operativni sustavi Windows 10 Drugo • • • Microsoft Windows 10 Home 64-bitni Microsoft Windows 10 Professional 64 bitni Microsoft Windows 10 National Academic 64-bitni (Bid Desk) • • Ubuntu 16.04 LTS 64-bitni NeoKylin 6.
Instalirajte sljedeće upravljačke programe. Neki od njih možda su prisutni po zadanoj postavci. • Upravljački program za Intel HID Event Filter • Upravljački programi za Intel Dynamic Platform i Thermal Framework • Upravljački program za Intel Serial IO • Management Engine • Realtek PCI-E memorijska kartica Upravljački program za Serial IO Provjerite jesu li instalirani upravljački programi za podlogu osjetljivu na dodir, IC kameru i tipkovnicu. Slika 5.
Upravljački programi za USB Provjerite jesu li upravljački programi za USB već instalirani na računalu. Realtek Audio Provjerite jesu li upravljački programi za Intel set čipova već instalirani na računalu. Tablica 22. Realtek audio Prije instalacije Nakon instalacije Serijski ATA upravljački programi Za najbolju izvedbu instalirajte najnoviji upravljački program za Intel Rapid Storage. Upotreba zadanih upravljačkih programa za pohranu sustava Windows ne preporučuje se.
Softver
7 Rješavanje problema Ponovno postavljanje sata u stvarnom vremenu Funkcija ponovnog postavljanja sata u stvarnom vremenu (RTC) vama ili servisnom tehničaru omogućuje vraćanje nedavno plasiranog modela Dell Latitude i sustava Precision iz odabranih situacija bez POST-a / bez pokretanja / bez napajanja. Ponovno postavljanje RTC-a na sustavu možete pokrenuti iz isključenog stanja samo ako je priključen na AC napajanje. Pritisnite i držite gumb za uključivanje/isključivanje najmanje 25 sekundi.