Owners Manual

Installing the Input-Output board, SD card and coin cell battery
holder
1 Place the Input-Output (I/O) board into its slot on the palmrest.
2 Replace the M2x4 screw to secure the I/O board to the palmrest.
3 Connect the I/O board cable to its connector on the system board.
4 Install the:
a battery
b base cover
5 Follow the procedure in After working inside your computer
Fingerprint reader – optional
Removing the ngerprint reader
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a base cover
b battery
34
Disassembly and reassembly