Latitude 3590 Panduan Pemilik Model Resmi: P75F Tipe Resmi: P75F001
Catatan, perhatian, dan peringatan CATATAN: Sebuah CATATAN menandakan informasi penting yang membantu Anda untuk menggunakan yang terbaik dari produk Anda. PERHATIAN: PERHATIAN menunjukkan kemungkinan terjadinya kerusakan pada perangkat keras atau hilangnya data, dan memberi tahu Anda mengenai cara menghindari masalah tersebut. PERINGATAN: PERINGATAN menunjukkan potensi kerusakan harta benda, cedera pribadi, atau kematian © 2018 Dell Inc. Atau anak-anak perusahaannya. Hak cipta dilindungi undang-undang.
Daftar Isi 1 Mengerjakan komputer Anda.......................................................................................................................... 7 Tindakan pencegahan........................................................................................................................................................ 7 Daya standby.................................................................................................................................................................
Speaker............................................................................................................................................................................. 26 Melepaskan speaker.................................................................................................................................................. 26 Memasang speaker................................................................................................................................................
Memasang board sistem........................................................................................................................................... 54 Sandaran tangan..............................................................................................................................................................55 Melepaskan sandaran tangan...................................................................................................................................
Opsi layar Security (Keamanan).....................................................................................................................................80 Opsi layar Secure Boot (Boot Aman)............................................................................................................................ 82 Opsi layar Intel Software Guard Extensions..................................................................................................................
1 Mengerjakan komputer Anda Topik: • Tindakan pencegahan • Sebelum mengerjakan bagian dalam komputer • Setelah mengerjakan bagian dalam komputer Tindakan pencegahan Bab tindakan pencegahan memerinci langkah-langkah utama yang harus diambil sebelum menjalankan instruksi pembongkaran. Perhatikan tindakan pencegahan berikut sebelum Anda melakukan prosedur pemasangan atau bongkar/pasang yang meliputi pembongkaran atau perakitan kembali: • Matikan sistem dan semua periferal tersambung.
Diakibatkan naiknya kerapatan semikonduktor yang digunakan dalam produk-produk terbaru Dell, sensitifitas terhadap kerusakan statis sekarang semakin tinggi dibandingkan dari produk-produk Dell sebelumnya. Untuk alasan ini, beberapa metode yang sebelumnya disetujui untuk penanganan komponen sudah tidak berlaku lagi.F Dua tipe kerusakan ESD yang dikenali adalah kegagalan bencana besar dan kegagalan intermiten.
• Lingkungan Kerja – Sebelum menyiapkan peeralatan Servis Lapangan ESD, tentukan situasi di lokasi pelanggan. Misalnya, menyiapkan peralatan untuk lingkungan server berbeda dari lingkungan desktop atau lingkungan portabel. Server pada umumnya dipasang di rak di dalam pusat data; desktop atau portabel pada umumnya ditempatkan di meja kantor atau bilik.
PERHATIAN: Agar tidak terkena sengatan listrik, lepaskan selalu komputer dari stopkontak sebelum melakukan Langkah # 8. PERHATIAN: Untuk menghindari terkena sengatan listrik, gunakan gelang antistatis atau pegang permukaan logam yang tidak dicat, seperti konektor pada bagian belakang komputer secara berkala. 8 Lepaskan ExpressCard atau Smart Card yang terpasang dari slotnya masing-masing.
2 Melepaskan dan memasang komponen Bagian ini menyediakan informasi yang mendetail tentang cara melepaskan atau memasang komponen dari komputer Anda. Alat bantu yang direkomendasikan Prosedur dalam dokumen ini meminta Anda menyediakan alat bantu berikut: • Obeng Phillips #0 • Obeng Phillips #1 • Pencungkil plastik CATATAN: Obeng #0 untuk sekrup 0-1 dan obeng #1 untuk sekrup 2-4 Daftar ukuran sekrup Tabel 1. Daftar ukuran sekrup Komponen M2x2 M2x2OD 5(Ni) Mx3 M2x4 M2.5x2.
Tombol daya ke sandaran tangan 1 Board daya ke sandaran tangan 1 Board VGA ke sandaran tangan 2 Board WWAN ke sandaran 2 tangan Board IO ke sandaran tangan 1 Braket Engsel Kiri + Kanan ke sandaran tangan 6 HDD BRK ke sandaran tangan 4 KIPAS ke sandaran tangan 3 Baterai ke sandaran tangan 5 Modul WLAN ke Board sistem 1 Modul WWAN ke Board WWAN 1 SSD ke sandaran tangan FP BRK ke sandaran tangan 1 1 Alas ke pelat engsel Kiri + Kanan ke sandaran tangan Baki SIM Melepaskan baki SIM – model
3 Masukkan ujung klip kertas ke dalam lubang slot baki SIM dan kemudian tarik keluar dan lepaskan baki SIM. Memasang baki SIM – Model WWAN 1 Luruskan dan dorong kembali baki SIM ke slot baki SIM. 2 Tutup penutup slot kartu SIM. 3 Ikuti prosedur dalam Setelah mengerjakan bagian dalam komputer. Kartu SD – opsional Kartu SD adalah komponen opsional. Anda akan melihat kartu SD hanya dalam sistem yang dikirimkan dengan kartu WWAN.
Memasang kartu SD – model WWAN 1 Dorong kartu SD ke dalam slotnya hingga kartu SD terpasang pada tempatnya ditandai dengan suara klik. 2 Ikuti prosedur dalam Setelah mengerjakan bagian dalam komputer. Penutup Bawah Melepaskan penutup bawah 1 Ikuti prosedur di dalam Sebelum mengerjakan bagian dalam komputer Anda 2 Lepaskan baki SIM (model WWAN). 3 Untuk melepaskan penutup bawah: a Longgarkan sekrup penahan 10 M2.5 yang menahan penutup bawah ke komputer .
4 Angkat penutup dasar dari komputer.
Pasang Penutup Bawah 1 Sejajarkan penutup bawah dengan dudukan sekrup pada komputer. 2 Tekan tepi penutup tersebut sampai masuk ke tempatnya, ditandai dengan bunyi klik. 3 Kencangkan 10 sekrup M2.5 untuk menahan penutup bawah ke komputer. 4 Pasang baki SIM (model WWAN). 5 Ikuti prosedur dalam Setelah mengerjakan bagian dalam komputer. Baterai Melepaskan baterai 1 Ikuti prosedur dalam Sebelum mengerjakan bagian dalam komputer Anda.
Memasang baterai 1 Sisipkan baterai ke dalam slot pada komputer. 2 Lepaskan 5 sekrup M2x3 untuk menahan baterai ke komputer. 3 Sambungkan kabel baterai ke konektor pada board sistem. 4 Pasang: CATATAN: Baterai 3-sel hanya memiliki sekrup. a b 5 penutup bawah baki SIM (model WWAN) Ikuti prosedur dalam Setelah mengerjakan bagian dalam komputer. Kartu WLAN Melepaskan kartu WLAN 1 Ikuti prosedur dalam Sebelum mengerjakan bagian dalam komputer Anda.
Memasang kartu WLAN 1 Masukkan kartu WLAN ke konektornya pada board sistem. 2 Masukkan kabel antena di bawah engsel display kiri dan sambungkan kabel antena ke kartu WLAN. 3 Pasang kembali dudukan kartu WLAN pada kartu WLAN. 4 Kencangkan sekrup M2x3 untuk menahan kartu WLAN dan dudukan kartu ke board sistem. 5 Pasang: a b 6 baterai penutup bawah Ikuti prosedur dalam Setelah mengerjakan bagian dalam komputer.
c Tarik kartu WWAN dari konektornya pada board sistem [4]. Memasang kartu WWAN 1 Masukkan kartu WWAN ke konektornya pada board sistem. 2 Sambungkan dua kabel antena ke kartu WWAN. 3 Pasang kembali braket logam pada WWAN. 4 Kencangkan sekrup M2xL3 untuk menahan kartu WWAN dan braket ke board sistem.
Memasang board VGA 1 Tempatkan board VGA dalam slotnya pada sistem. 2 Pasang kembali dua sekrup M2x3 untuk menahan board VGA ke sistem. 3 Sambungkan kabel daughter board VGA ke daughter board VGA. 4 Pasang: a b 5 baterai penutup bawah Ikuti prosedur dalam Setelah mengerjakan bagian dalam komputer.
Modul Memori Melepaskan modul memori 1 Ikuti prosedur dalam Sebelum mengerjakan bagian dalam komputer Anda. 2 Lepaskan: a b 3 penutup bawah baterai Untuk melepaskan modul memori: a b Cungkil kait modul memori [1]. Angkat dan lepaskan modul memori dari papan sistem [2]. Memasang modul memori 1 Masukkan modul memori ke dalam konektornya pada sudut 30 derajat sampai kontak terpasang penuh ke dalam slotnya. Kemudian, tekan modul memori hingga klip tersebut menahan modul memori.
Hard Disk Melepaskan drive hard disk (HDD) 1 Ikuti prosedur dalam Sebelum mengerjakan bagian dalam komputer Anda. 2 Lepaskan: a b 3 penutup bawah baterai Untuk melepaskan drive hard disk (HDD): 22 a Lepaskan sambungan kabel HDD dari board sistem . b c Lepaskan 4 sekrup M3x3 yang menahan HDD ke sandaran tangan [1]. Angkat HDD dari komputer [2].
4 Lepaskan interposer kabel HDD. 5 Selanjutnya, lepaskan sekrup M3xL3 untuk melepaskan braket dari HDD.
6 Angkat braket dari hard disk. Memasang hard disk drive 1 Kencangkan sekrup M3x3 yang menahan braket ke HDD. 2 Sambungkan interposer kabel HDD. 3 Masukkan HDD ke dalam konektor pada komputer. 4 Kencangkan sekrup 4 M3x3 untuk menahan HDD ke komputer. 5 Sambungkan kabel HDD ke board sistem.
6 Pasang: a b 7 baterai penutup bawah Ikuti prosedur dalam Setelah mengerjakan bagian dalam komputer. Solid State Drive (SSD) SATA Melepaskan kartu SSD 1 Ikuti prosedur dalam Sebelum mengerjakan bagian dalam komputer Anda. 2 Lepaskan: a b 3 penutup bawah baterai Untuk melepaskan kartu Solid State Drive (SSD): a b Lepaskan dua sekrup yang menahan braket SSD ke sistem [1], dan angkat braket dari sistem [2]. Geser dan angkat SSD dari sistem [3].
3 Pasang: . a b 4 baterai penutup bawah Ikuti prosedur dalam Setelah mengerjakan bagian dalam komputer. Speaker Melepaskan speaker 1 Ikuti prosedur dalam Sebelum mengerjakan bagian dalam komputer Anda. 2 Lepaskan: a b c 3 Untuk melepaskan speaker: a b c 4 penutup bawah baterai SSD Lepaskan sambungan kabel speaker dari konektor pada board sistem [1]. Lepaskan pita perekat yang menahan kabel speaker ke komputer [2]. Lepas perutean kabel speaker dari kanal peruteannya pada sistem [3].
Memasang speaker 1 Letakkan speaker ke dalam slotnya pada komputer. 2 Tempelkan pita perekat untuk menahan kabel speaker ke komputer 3 Rutekan kabel baterai melalui kanal peruteannya. 4 Sambungkan kabel speaker ke konektor pada board sistem. 5 Pasang: a b c 6 SSD baterai penutup bawah Ikuti prosedur dalam Setelah mengerjakan bagian dalam komputer. Baterai sel berbentuk koin Melepaskan baterai sel berbentuk koin 1 Ikuti prosedur dalam Sebelum mengerjakan bagian dalam komputer Anda.
Memasang baterai sel berbentuk koin 1 Tempatkan baterai sel berbentuk koin ke dalam slot pada board sistem. 2 Sambungkan kabel baterai ke board sistem. 3 Pasang: a b 4 baterai penutup bawah Ikuti prosedur dalam Setelah mengerjakan bagian dalam komputer. Unit pendingin Melepaskan unit pendingin 1 Ikuti prosedur dalam Sebelum mengerjakan bagian dalam komputer Anda.
b Angkat unit pendingin dari komputer. Memasang unit pendingin 1 Masukkan unit pendingin ke dalam slot pada komputer. 2 Kencangkan sekrup M2.5x2.5 dan pasang kembali tiga sekrup M2x3 untuk menahan unit pendingin ke komputer.
CATATAN: Kencangkan sekrup unit pendingin sesuai dengan urutan yang ditunjukkan pada unit pendingin. 3 Pasang: a b 4 baterai penutup bawah Ikuti prosedur dalam Setelah mengerjakan bagian dalam komputer. Kipas Sistem Melepaskan kipas sistem 1 Ikuti prosedur dalam Sebelum mengerjakan bagian dalam komputer Anda. 2 Lepaskan: a b 3 penutup bawah baterai Untuk melepaskan kipas sistem: 30 a Lepaskan perutean kabel eDP dari kanal perutean pada kipas sistem [1].
Memasang kipas sistem 1 Tempatkan kipas pada komputer. 2 Kencangkan 3 sekrup M2.5x5 untuk menahan kipas ke komputer. 3 Sambungkan kabel kipas ke board sistem. 4 Rutekan kabel eDP melalui kanal peruteannya pada kipas sistem. 5 Pasang: a b 6 baterai penutup bawah Ikuti prosedur dalam Setelah mengerjakan bagian dalam komputer. Board Input-Output Melepaskan board Input-Output 1 Ikuti prosedur dalam Sebelum mengerjakan bagian dalam komputer Anda.
4 Lepaskan baut M2x4 yang menahan board I/O [1] ke sistem dan angkat hingga terlepas dari sistem [2].
Memasang board Input-Output 1 Tempatkan board Input-Output (I/O) ke dalam slotnya pada sandaran tangan. 2 Pasang kembali sekrup M2x4 untuk menahan board I/O ke sandaran tangan. 3 Sambungkan kabel board I/O ke konektornya pada board sistem. 4 Pasang: a b 5 baterai penutup bawah Ikuti prosedur dalam Setelah mengerjakan bagian dalam komputer. Pembaca sidik jari – opsional Melepaskan pembaca sidik jari 1 Ikuti prosedur dalam Sebelum mengerjakan bagian dalam komputer Anda.
c 34 Angkat pembaca sidik jari dari komputer.
Memasang pembaca sidik jari 1 Tempatkan board pembaca sidik jari ke dalam slot pada sandaran tangan. 2 Tempatkan braket logam pada pembaca sidik jari dan pasang kembali sekrup untuk menahan pembaca sidik jari ke sistem. 3 Tempelkan kabel yang ditempelkan pita perekat untuk menahannya ke sandaran tangan. 4 Sambungkan kabel pembaca sidik jari ke konektor pada board sistem. 5 Pasang: a b c 6 Board I/O baterai penutup bawah Ikuti prosedur dalam Setelah mengerjakan bagian dalam komputer.
7 Lepaskan empat sekrup M2x2 yang menahan panel sentuh pada komputer [1] dan angkat panel sentuh dari sistem [2]. Memasang panel sentuh 1 Letakkan panel sentuh ke dalam slot di komputer dan pasang kembali empat sekrup M2x2 untuk menahannya ke sistem. 2 Sambungkan kabel panel sentuh dan lampu belakang keyboard ke konektornya yang ada di board sistem.
3 Tempelkan pita perekat untuk menahan panel sentuh ke sistem. 4 Sejajarkan dan letakkan braket logam di bawah plastik dan tekan ke bawah. 5 Pasang kembali dua sekrup M2x2 untuk menahan braket logam ke panel sentuh. 6 Pasang: a b 7 baterai penutup bawah Ikuti prosedur dalam Setelah mengerjakan bagian dalam komputer. Unit display Melepaskan unit display 1 Ikuti prosedur dalam Sebelum mengerjakan bagian dalam komputer Anda.
PERHATIAN: Pegang sistem dengan kuat saat sistem ditempatkan di posisi ini. 8 Lepaskan 6 sekrup M2.5x2.5 [1] dan angkat unit display dari komputer [2]. PERHATIAN: Pegang unit display dengan kuat saat Anda menempatkan unit display di sandaran tangan pada sudut 90 derajat, untuk mencegah kerusakan unit display.
Memasang unit display 1 Letakkan unit display di atas sandaran tangan pada sudut sekitar 90 derajat dan sejajarkan dengan dudukan sekrup di sandaran tangan. CATATAN: Pegang unit display dengan kuat saat Anda menempatkan unit display di sandaran tangan pada sudut 90 derajat, untuk mencegah kerusakan unit display. 2 Kencangkan 6 sekrup M2.5x2.5 untuk menahan unit display ke komputer. 3 Balikkan komputer 4 Rutekan kabel WLAN melalui kanal perutean.
Port DC-In Melepaskan port DC-in 1 Ikuti prosedur dalam Sebelum mengerjakan bagian dalam komputer Anda. 2 Lepaskan: a b c d 3 penutup bawah Melepaskan kartu WLAN Melepaskan kartu WWAN unit display Untuk melepaskan port DC-in: a b c d Lepaskan koneksi kabel DC-in dari konektornya pada papan sistem [1]. Lepaskan perutean kabel DC-in dari klip perutean pada sistem [2]. Lepaskan sekrup M2.5x3 yang menahan port DC-in ke sandaran tangan [3]. Angkat port DC-in dari sistem [4].
a b c d e 6 unit display WLAN WWAN baterai penutup bawah Ikuti prosedur dalam Setelah mengerjakan bagian dalam komputer Board tombol daya Melepaskan board tombol daya 1 Ikuti prosedur dalam Sebelum mengerjakan bagian dalam komputer Anda.
Memasang board tombol daya 1 Tempatkan board tombol daya dalam slotnya. 2 Kencangkan sekrup M2x2 yang menahan board tombol daya ke sistem. 3 Tempelkan pita perekat untuk menahan board tombol daya ke sistem. 4 Kencangkan kabel board tombol daya yang ditahan oleh perekat ke sistem dan kemudian sambungkan kabel ke konektornya pada board sistem.
Memasang bezel LCD 1 Pasang kembali bezel dan secara perlahan tekan pada pinggirannya untuk memasang bezel pada tempatnya. 2 Pasang: a b c d e 3 unit display Memasang kartu WWAN Memasang kartu WLAN baterai penutup bawah Ikuti prosedur dalam Setelah mengerjakan bagian dalam komputer. Kamera Melepaskan kamera 1 Ikuti prosedur dalam Sebelum mengerjakan bagian dalam komputer Anda.
Memasang kamera 1 Tempatkan kamera pada penutup belakang LCD. 2 Sambungkan kabel kamera ke konektornya. 3 Tempelkan pita perekat untuk menahan kamera ke penutup belakang LCD. 4 Pasang: a b c d e f 5 bezel LCD unit display WWAN WLAN baterai penutup bawah Ikuti prosedur dalam Setelah mengerjakan bagian dalam komputer. Panel LCD Melepaskan panel LCD 1 Ikuti prosedur dalam Sebelum mengerjakan bagian dalam komputer Anda.
a b c d e penutup bawah kartu WLAN kartu WWAN unit display Bezel LCD 3 Lepaskan pita perekat yang menahan panel LCD ke penutup belakang LCD [1]. 4 Lepaskan empat sekrup M2x2 yang menahan panel LCD ke penutup belakang LCD [2] dan balik untuk membuka konektor kabel eDP [3]. 5 Angkat stiker perekat untuk membuka konektor LCD [1], dan lepaskan konektor dari panelnya [2,3].
Memasang Panel LCD 1 Sambungkan kabel LCD ke konektornya pada sisi belakang panel LCD. 2 Tempelkan stiker pita. 3 Tempatkan panel LCD pada penutup belakang LCD dan sejajarkan panel LCD dengan dudukan sekrup pada penutup belakang LCD. 4 Pasang kembali sekrup 4 M2x2 untuk menahan panel LCD ke penutup belakang LCD. 5 Rutekan kabel eDP melalui kanal perutean dan pasang kabel ke panel display dengan pita perekat.
e f Bezel LCD panel LCD 3 Lepaskan 8 sekrup M2.5x2.52 M2x2 yang menahan braket logam ke penutup belakang LCD [1]. 4 Lepaskan engsel LCD dari sistem [2]. Memasang engsel LCD 1 Tempatkan braket engsel kiri dan kanan pada penutup belakang LCD, sejajarkan dengan tab pengunci pada sisi penutup belakang LCD. 2 Kencangkan sekrup untuk menahan braket engsel kiri dan kanan ke penutup belakang LCD.
a b c d e f penutup bawah kartu WLAN kartu WWAN unit display Bezel LCD Panel LCD 3 Lepaskan pita perekat yang menahan kabel kamera dan eDP [1]. 4 Lepaskan sekrup yang menahan braket kanan ke penutup belakang LCD [2] dan angkat braket menjauh dari penutup belakang LCD [3]. 5 Lepaskan sambungan kabel kamera dari konektornya pada penutup belakang LCD [4]. 6 Lepaskan perutean kabel dari klip perutean di penutup belakang LCD, lepaskan dari pita perekat yang menahan kabel ke penutup belakang.
Memasang kabel eDP dan kamera 1 Rutekan kabel display melalui kanal peruteannya dan pasang kabel display ke penutup belakang LCD dengan pita perekat. 2 Sambungkan kabel kamera ke konektornya pada penutup belakang LCD. 3 Pasang kembali sekrup untuk menahan braket engsel kanan ke penutup belakang LCD. 4 Pasang kabel eDP ke penutup belakang LCD dengan pita perekat.
e 3 Lepaskan sambungan kabel dan konektor berikut ini: a b c d e 4 unit display Kabel VGA [1] Lepaskan perutean kabel VGA dari kanal perutean [2] Kabel hard disk [3] Konektor kabel speaker [4] Kabel DC-input [5] Lepaskan sambungan kabel berikut ini: a b c d e 50 Kabel board tombol daya [1] Kabel I/O [2] Kabel panel sentuh [3] Kabel lampu latar keyboard [4] Kabel keyboard [5] Melepaskan dan memasang komponen
5 Lepaskan sekrup M2x4 yang menahan board sistem ke sistem.
• Untuk sistem yang dikirimkan dengan kartu WWAN dan sensor sidik jari: 1 Secara hati-hati angkat sisi kanan board sistem dan balikkan. 2 Lepakan sambungan kabel FPC daughter board WWAN [1] dan kabel daughter board VGA [2] dari konektor pada sisi bawah 3 Angkat board sistem dari sistem. board.
• 7 Untuk konfigurasi lainnya, angkat board sistem. Lepaskan sekrup yang menahan braket USB Tipe-C ke board sistem [1] dan angkat braket USB Tipe-C dari board sistem [2].
Memasang board sistem 1 Sambungkan kabel WWAN dan sidik jari ke konektor pada sisi bawah board sistem. CATATAN: Langkah ini hanya berlaku untuk sistem yang dikirimkan dengan kartu WWAN dan pembaca sidik jari. 2 Sejajarkan board sistem dengan dudukan sekrup pada komputer. 3 Kencangkan sekrup M2x4 untuk menguatkan board sistem ke komputer. 4 Sambungkan kabel board tombol Daya, I/O, panel sentuh, lampu latar keyboard, dan keyboard ke konektornya masing-masing.
Sandaran tangan Melepaskan sandaran tangan 1 Ikuti prosedur dalam Sebelum mengerjakan bagian dalam komputer Anda. 2 Lepaskan: a b c d e f g h i j k l m n o penutup bawah baterai unit pendingin kipas kartu WLAN kartu WWAN modul memori HDD Port DC-in Board I/O baterai sel berbentuk koin speaker panel sentuh unit display board sistem CATATAN: Komponen yang masih tertinggal adalah sandaran tangan. 3 Pasang komponen berikut ini di sandaran tangan yang baru.
e f g h i j k l m n o 4 baterai sel berbentuk koin Board I/O Port DC-in modul memori kartu WWAN kartu WLAN HDD kipas unit pendingin baterai penutup bawah Ikuti prosedur dalam Setelah mengerjakan bagian dalam komputer.
3 Spesifikasi teknis CATATAN: Penawaran mungkin berbeda-beda di setiap negara. Untuk informasi lebih lanjut mengenai konfigurasi komputer Anda, dalam: • Windows 10, klik atau tekan Start > Pengaturan > Tentang > Sistem.
Memori Komputer Anda mendukung memori maksimum 32 GB saat Anda menggunakan dua DIMM 16 GB; Namun, sistem operasi 32-bit, seperti versi 32-bit Microsoft Windows 10, hanya dapat menggunakan ruang yang ditujukan maksimum 4GB. Lebih lanjut, komponen tertentu di dalam komputer membutuhkan ruang yang ditujukan dalam kisaran 4GB.
Spesifikasi video Tabel 3. Tabel yang menunjukkan spesifikasi video Fitur Spesifikasi Tipe Terintegrasi pada board sistem, perangkat keras diakselerasi Pengontrol UMA : • • Sky Lake: Intel HD Graphics 520 Kaby Lake: Intel HD Graphics 610\620, Intel UHD Graphics 620 Diskret: • Dukungan display eksternal AMD Radeon 530 VGA, HDMI 1.4 Spesifikasi webcam Topik ini mencantumkan rincian spesifikasi kamera. Kolaborasi Jarak Jauh yang Mudah: • Konferensi video online dengan kamera terpasang.
Laju Data 10/100/1000 Mbps Pengontrol arsitektur bus PCI-e V1.1x1 Konsumsi daya (pengoperasian penuh per kecepatan koneksi laju data) 1000 Mbps: 828 mW 100 Mbps: 441,77 mW 10 Mbps: 387,94 mW Konsumsi daya (pengoperasian standby) WOL Dinonaktifkan: 10mW (Dinonaktifkan menggunakan driver) Tanpa Link (dengan WOL): 51,89 mW (kabel Dilepaskan) 10 Mbps Diam (dengan WOL): 68 mW 100 Mbps Diam (dengan WOL): 176 mW Keseusaian dengan standar IEEE 802.3, 802.3ab, 802.3u, 802.
Atribut Spesifikasi 802.11g/a: -72 dBm@ 54 Mbps 802.11b: -85 dBm@ 11 Mbps Security (Keamanan) Terbuka, Berbagi, WPA, WPA-PSK, WPA2, WPA2-PSK Otentikasi EAP-TLS, EAP-TTLS (MSCHAPv2), PEAPv0(EAP-MS-CHAPv2) Metode EAP Utilitas Klien Wi-Fi asli dan dukungan UI Bluetooth Microsoft Radio Hidup/Mati Perangkat keras dan perangkat lunak hidup/mati menonaktifkan pengiriman dan penerimaan untuk mematuhi larangan dalam penerbangan Roaming Roaming tanpa batas antara titik akses 802.11a, 802.11b, 802.
Atribut Spesifikasi Pengalihan Antena Berbeda Ganda Pengalihan antena berbeda ganda untuk sistem didesain dengan antena utama dan tambahan pengoperasian 2x2 MIMO ketika berada dalam mode 802.11n dengan Titik Akses 2x2 atau lebih besar Laju data 802.11ac – Hingga 867 Mbps; 802.11n - Hingga 450 Mbps; 802.11a/g - Hingga 54 Mbps 802.11b - Hingga 11 Mbps Sensitivitas Penerimaan 802.11ac: -59 dBm@ 400 Mbps; - 57dBm @ 866.7Mbps 802.11n/a: -67 dBm@ 300 Mbps ; -70 dBm @ 144.4Mbps 802.
Tabel 8. Intel® Dual Band Nirkabel-AC 8265 802.11AC 2x2 Wi-Fi + BT 4.2 LE M.2 Kartu Nirkabel Atribut Spesifikasi Antarmuka host M.2 2230 faktor bentuk (WiFi– PCIe, Bluetooth – USB) Standar jaringan IEEE 802.11a/b/g/n/ac MU-MIMO RX Sertifikasi Aliansi Wi-Fi 802.11a/b/g/n/ac, WPA, WPA2, WMM, WPS, Wi-Fi Langsung Band Frekuensi Pengoperasian 2.
Atribut Spesifikasi Suhu Suhu pengoperasian 0° hingga +50° C (Kinerja penuh pada suhu pelindung hingga 80° C) Suhu penyimpanan –40° hingga +70° C Kelembapan Hingga 90% RH tanpa kondensasi (pada suhu 25° C hingga 35° C) Tabel 9.
Operator seluler Generic Tiongkok / Indonesia Jaringan Mundur HSPA+ HSPA+ Kecepatan Mundur HSPA+ 42 Mbps HSPA+ 42 Mbps Band Frekuensi Band 1, 2, 3, 4, 5, 8, HSPA+ Band 1, 2, 3, 4, 5, 8, HSPA+ SIM Ya Ya Antena LTE/WWAN Utama (Tx/Rx) +Aux (Rx/GNSS) Utama (Tx/Rx) +Aux (Rx/GNSS) Dukungan Sistem Operasi Windows 8,1, 32/64 bit Windows 8,1, 32/64 bit Windows 10, 32/64 bit Windows 10, 32/64 bit GNSS Mendukung kedua GNSS otonom (GPS + GLONASS) dan GNSS dengan bantuan (AGNSS) Mendukung kedua
Tabel 12.
Fn + F9 Menelusuri Fn + F10 Menaikkan Kecerahan Lampu Latar Keyboard Fn + F11 Kecerahan naik Fn + F12 Kecerahan turun Fn + Printscreen Wireless (Nirkabel) • Perilaku utama adalah tombol F1-F12; Perilaku sekunder adalah tombol media. • Fn Lock hanya mengalihkan perilaku utama dan sekunder pada F1-F12 • F7 akan berperilaku sama karena tidak ada perilaku sekunder Panel sentuh Tabel 14. Panel sentuh Dimensi Panjang 104,4 mm Tinggi 79,4 mm Tabel 15.
Tabel 16.
Berat (kg) 0,23 0,29 Dimensi (TxBxK inci) 1,1x1,9x4,3 1,1 x 1,9 x 4,3 Dimensi (TxBxK mm) 28 x 47 x 108 28 x 47 x 108 Kisaran suhu: 0° hingga 40°C 0° hingga 40°C Pengoperasian 32° hingga 104°F 32° hingga 104°F Penyimpanan -40° hingga 70°C -40° hingga 70°C -40° hingga 158°F -40° hingga 158°F Dimensi sistem Topik ini mendata dimensi komputer secara detail.
4 Teknologi dan komponen Bagian ini menjelaskan tentang teknologi dan komponen yang tersedia pada sistem. Topik: • DDR4 • Fitur USB • HDMI 1.4 • USB Tipe-C DDR4 DDR4 (double data rate generasi keempat) memori adalah penerus kecepatan tinggi ke DDR2 dan DDR3 teknologi dan memungkinkan hingga 512 GB dalam kapasitas, dibandingkan dengan maksimum DDR3 untuk 128 GB per DIMM.
Angka 2. Perbedaan ketebalan Tepian melengkung Modul DDR4 memiliki fitur tepian melengkung untuk membantu pemasukan dan meringankan tekanan pada PCB selama pemasangan memori. Angka 3. Tepian melengkung Kesalahan pada memori Kesalahan pada memori pada sistem tampilan ON-FLASH-FLASH atau ON-FLASH-ON kode kesalahan baru. Jika semua memori gagal, LCD tidak menyala.
bandwidth yang semakin besar. USB 3.0/USB 3.1 Gen 1 akhirnya memiliki jawaban untuk tuntutan konsumen dengan secara teoritis 10 kali lebih cepat dari pendahulunya. Singkatnya, USB 3.
Aplikasi USB 3.0/USB 3.1 Gen 1 membuka dan menyediakan lebih banyak ruang kepala untuk perangkat untuk memberikan pengalaman lebih baik secara keseluruhan. Dimana video USB hampir tidak ditoleransi sebelumnya (baik dari resolusi, latensi, dan perspektif kompresi video maksimum), mudah untuk membayangkan bahwa dengan 5-10 kali bandwidth yang tersedia, USB solusi video harus bekerja dengan jauh lebih baik. Single-link DVI membutuhkan hampir 2 Gbps throughput.
Fitur HDMI 1.
portabel Anda mulai hari ini. Anda dapat menyambungkan laptop Anda ke layar eksternal yang tersambung ke kabel daya, dan layar eksternal tersebut akan mengisi daya laptop Anda saat Anda menggunakannya sebagai layar eksternal — semuanya melalui satu koneksi USB Tipe-C yang kecil. Untuk menggunakan ini, perangkat dan kabel tersebut harus mendukung USB Power Delivery. Hanya memiliki koneksi USB TipeC tidak berarti mereka dapat melakukannya. USB Tipe-C dan USB 3.1 USB 3.1 adalah standar USB yang baru.
5 Opsi System setup (Pengaturan sistem) CATATAN: Bergantung pada komputer dan perangkat yang dipasangnya, komponen yang tercantum pada bagian ini dapat muncul atau juga tidak.
• Hard Disk SATA (jika ada) • Diagnostik CATATAN: Memilih Diagnostics (Diagnostik), akan menampilkan layar ePSA diagnostics (Diagnostik ePSA). Layar boot sequence (urutan boot) juga menampilkan opsi untuk mengakses layar System Setup (Pengaturan Sistem). Tombol navigasi CATATAN: Untuk kebanyakan opsi System Setup (Pengaturan Sistem), perubahan yang Anda buat akan disimpan namun tidak akan diterapkan hingga Anda menyalakan ulang sistem Anda.
Opsi Deskripsi Informasi Sistem Bagian ini mendaftar fitur perangkat keras primer komputer Anda. • System Information (Informasi Sistem): Menampilkan Versi BIOS, Tag Servis, Tag Aset, Tag Kepemilikan, Tanggal Kepemilikan, Tanggal Pembuatan, dan Kode Servis Ekspres.
Opsi Deskripsi • M.2 PCIe SSD-0 (bawaan) Pelaporan SMART Mengontrol dilakukan atau tidaknya pelaporan kesalahan drive hard untuk driver terintegrasi selama pengaktifan sistem. Opsi ‘Enable Smart Reporting (Aktifkan Pelaporan Pintar)’ tidak dipilih secara bawaan. Konfigurasi USB Ini merupakan fitur opsional.
Opsi Deskripsi dalam penggunaan Baterai Opsi adalah: • 5 seconds (5 detik) • 10 seconds (10 detik) (bawaan) • 15 seconds (15 detik) • 30 seconds (30 detik) • 1 minute (1 menit) • 5 minutes (15 menit) • 15 minutes (15 menit) • Never (Tidak Pernah) Layar sentuh Mengontrol apakah layar sentuh diaktifkan atau dinonaktifkan. Opsi layar sentuh diaktifkan secara bawaan. Mode Tidak Mencolok Saat diaktifkan, penekanan Fn+F7 akan mematikan semua lampu dan emsisi suara dari sistem.
Opsi Deskripsi Internal HDD-0 Password Memungkinkan Anda untuk membuat, mengubah, atau menghapus kata sandi administrator. CATATAN: Kata sandi yang berhasil diubah akan langsung aktif. Pengaturan bawaan: Not set (Tidak disetel) Kata Sandi Kuat Memungkinkan Anda untuk menerapkan opsi untuk selalu menetapkan kata sandi yang kuat. Pengaturan Bawaan: Enable Strong Password (Aktifkan Kata Sandi Kuat) tidak dipilih.
Opsi Deskripsi Computrace Memungkinkan Anda untuk mengaktifkan atau menonaktifkan perangkat lunak Computrace bawaan. Opsinya adalah: • Deactivate (Nonaktifkan) • Disable (Nonaktifkan) • Diaktifkan—diaktifkan secara bawaan CATATAN: Opsi Activate (Aktifkan), Deactivate (Nonaktifkan) dan Disable (Nonaktifkan) akan secara permanen mengaktifkan atau menonaktifkan fitur dan perubahan lebih lanjut tidak akan diizinkan.
Opsi Deskripsi • Replace from File (Ganti dari File)—Mengganti kunci saat ini dengan kunci dari file yang dipilih pengguna • Append from File (Tambah dari File)—Menambahkan kunci pada basis data saat ini dari file yang dipilih pengguna • Delete (Hapus)—Menghapus kunci yang terpilih • Reset All Keys (Setel Ulang Semua Tombol)—Mengatur ulang ke pengaturan bawaan • Delete All Keys (Hapus Semua Tombol)—Menghapus semua tombol CATATAN: Jika Anda menonaktifkan Custom Mode (Mode Kustom), semua perubahan y
Opsi Deskripsi Pengaturan bawaan: Opsi ini diaktifkan. Intel TurboBoost Memungkinkan Anda untuk mengaktifkan atau menonaktifkan mode Intel TurboBoost dari prosesor. • Enable Intel TurboBoost (Aktifkan Intel TurboBoost) Pengaturan bawaan: Opsi ini diaktifkan. HyperThread Control Mengaktifkan atau menonaktifkan HyperThreading di dalam prosesor.
Opsi Deskripsi Mengaktifkan pada WLAN Memungkinkan Anda untuk mengaktifkan atau menonaktifkan fitur yang memberi daya pada komputer dari kondisi Mati ketika dipicu oleh sinyal LAN. Block Sleep • Disabled (Dinonaktifkan) (bawaan) • LAN Only (Hanya LAN) • WLAN Only (Hanya WLAN) • LAN or WLAN (LAN atau WLAN) • LAN with PXE Boot (LAN dengan PXE Boot) Opsi ini memungkinkan Anda untuk memblokir masuknya ke kondisi tidur (kondisi S3) dalam lingkungan sistem operasi.
Opsi Deskripsi Emulasi Tombol Fn Memungkinkan Anda untuk menggunakan tombol pada keyboard PS/2 eksternal sama dengan saat Anda menggunakan tombol pada keyboard internal komputer. • Enable Fn key Emulation (Aktifkan Emulasi Tombol Fn) — bawaan Opsi Penguncian Fn Memungkinkan Anda untuk membiarkan kombinasi kunci Fn + Esc mengalihkan perilaku utama F1-F12 antara fungsi standar dan fungsi sekundernya.
Opsi layar nirkabel Opsi Deskripsi Wireless Switch (Sakelar Nirkabel) Pengaturan ini menentukan alat nirkabel mana yang dapat dikontrol oleh Sakelar Nirkabel. • WWAN — diaktifkan secara bawaan • WLAN — diaktifkan secara bawaan • Bluetooth — diaktifkan secara bawaan • GPS (pada Modul WWAN) — diaktifkan secara bawaan Wireless Device Memungkinkan Anda untuk mengaktifkan atau menonaktifkan piranti nirkabel.
Resolusi sistem SupportAssist Opsi Deskripsi Batasan Pemulihan OS Otomatis Opsi pengaturan Ambang Batas Pemulihan OS Otomatis mengontrol aliran boot otomatis untuk Konsol Resolusi Sistem SupportAssist dan untuk Alat Bantu Pemulihan OS Dell.
CATATAN: Direkomendasikan untuk tidak memperbarui versi BIOS lebih dari tiga revisi. Misalnya: Jika Anda ingin memperbarui BIOS 1,0-7,0, kemudian memasang versi 4.0 pertama dan kemudian menginstal versi 7.0. Memperbarui BIOS sistem anda menggunakan USB flash drive Jika sistem tidak dapat masuk ke Windows namun masih perlu memperbarui BIOS, unduh file BIOS menggunakan sistem lain dan simpan ke USB Flash Drive yang dapat di-boot. CATATAN: Anda perlu menggunakan USB Flash drive yang dapat di-boot.
CATATAN: Fitur kata sandi sistem dan pengaturan dinonaktifkan. Menetapkan kata sandi sistem dan kata sandi pengaturan Anda dapat menetapakan System Password (Kata Sandi Sistem) baru hanya ketika statusnya ada dalam keadaan Not Set (Tidak Ditetapkan). Untuk masuk ke pengaturan sistem, tekan F2 segera setelah komputer dinyalakan atau di-boot ulang. 1 Pada layar System BIOS (BIOS Sistem) atau System Setup (Pengaturan Sistem), pilih Security (Keamanan) lalu tekan Enter. Layar Security (Keamanan) ditampilkan.
6 Perangkat Lunak Bab ini merinci sistem operasi yang didukung beserta petunjuk tentang cara memasang driver. Topik: • Konfigurasi sistem operasi • Mengunduh driver Konfigurasi sistem operasi Topik ini mencantumkan sistem operasi yang didukung Tabel 20. Sistem operasi Windows 10 Lainnya • • • Microsoft Windows 10 Home 64 bit Microsoft Windows10 Professional 64 bit Microsoft Windows 10 National Academic 64-bit (Bid Desk) • • Ubuntu 16.04 LTS 64-bit NeoKylin 6.
• Driver Kerangka Kerja Termal dan Platform Dinamis Intel • Driver Seri IO Intel • Mesin Pengelola • Kartu memori Realtek PCI-E Driver Seri IO Verifikasikan apakah driver untuk Panel Sentuh, kamera IR, dan keyboard sudah terpasang. Angka 5. Driver Seri IO Driver pengontrol grafis Verifikasikan apakah driver pengontrol grafis sudah terpasang dalam komputer. Tabel 21.
Driver USB Verifikasikan apakah driver USB sudah terpasang dalam komputer. Audio Realtek Verifikasikan apakah driver audio sudah terpasang dalam komputer. Tabel 22. Audio Realtek Sebelum Pemasangan Setelah Pemasangan Driver seri ATA Pasang driver Intel Rapid Storage (Penyimpanan Cepat Intel) terbaru untuk performa terbaik. Menggunakan driver penyimpanan bawaan Windows tidak direkomendasikan. Verifikasikan apakah driver seri ATA bawaan sudah terpasang dalam komputer.
Perangkat Lunak
7 Pemecahan Masalah Mengatur Ulang Jam Real Time Fungsi atur ulang Jam Reat Time (RTC) memungkinkan Anda atau teknisi servis Anda untuk memulihkan model Dell Latitude dan sistem Presisi lama dari situasi No POST(Tanpa POST)/No Boot (Tanpa Boot)/No Power (Tanpa Daya) yang dipilih. Anda dapat memulai atur ulang RTC pada sistem dari keadaan mati hanya jika terhubung ke daya AC. Tekan dan tahan tombol daya selama 25 detik. Sistem atur ulang RTC terjadi setelah Anda melepaskan tombol daya.