Owners Manual

9 Lift the display panel from the tablet.
Installing the display panel
1 Place the display panel on a plane surface.
2 Connect the display cable to the connector on the system board
3 Connect the battery cable to the connector on the system board.
4 Install the display panel on the tablet and press the edges until they snap in.
5 Flip the tablet and open the kickstand.
6 Replace the M1.6 x 3.0 screws to secure the tablet to the display panel.
7 Install the:
a uSIM/micro SD card
8 Follow the procedure in After working inside your tablet.
Removing the display cable
1 Follow the procedure in Before working inside your tablet.
2 Remove the:
a uSIM and/or microSD card
b display panel
3 Removing the display cable:
a Peel the tape that secures the touch module cable [1].
b Disconnect the touch module cable from the connector on the display panel [2].
c Do-not peel the tape that secures the display cable [3].
20
Using your tablet