Owners Manual

WLAN card

Removing the WLAN card

1 Follow the procedure in Before working inside your tablet.

2 Remove the:

a uSIM/micrSD card

NOTE: uSIM card slot is available only on tablets shipping with WWAN module.

b display panel

3 To remove the WLAN card:

a Remove the M2.0 x 3.5 screw securing the WLAN bracket [1] .

b Disconnect the antenna cables from the WLAN card [2] .

c Lift and slide the WLAN card from the connector on the system board [3].

NOTE: The system shipped with WiGig model have the optional WiGig (orange) cable connected.

Installing the WLAN card

1 Insert the WLAN card into the connector on the system board.

2 Connect the antenna cables to the WLAN card.

Using your tablet