Owners Manual

Installing the battery

1 Insert the battery into the slot on the tablet.

2 Replace the M2.0 x 4.0 screws to secure the battery to the tablet.

3 Install the:

a display panel

b uSIM/microSD card

NOTE

: uSIM card is installed only on tablets shipping with WWAN module.

4 Follow the procedure in After working inside your tablet.

System fan

Removing the system fan

1 Follow the procedure in Before working inside your tablet.

2 Remove the:

a uSIM/microSD card

NOTE

: Micro-SIM card slot is available only on tablets shipped with WWAN module.

b Display panel

3 To remove the system fan:

a Disconnect the system fan cable from the system board [1].

b Remove the M2.0 x 4.0 screws that secure the system fan [2].

c Lift the system fan from the tablet [3].

Using your tablet