Owners Manual

Installing the system fan
1 Align the system fan with screw holders on the system board.
2 Replace the M2.0 x 3.0 screws to secure the system fan to the system board.
3 Connect the system fan cable to the system board.
4 Install the:
a display panel
NOTE
: uSIM card is installed only on tablets shipping with WWAN module.
b uSIM/microSD card
5 Follow the procedure in After working inside your tablet.
Heat sink
Removing heat sink assembly
1 Follow the procedure in Before working inside your tablet.
2 Remove the:
a Micro-SIM and/or microSD card
NOTE
: Micro-SIM card slot is available only on tablets shipping with WWAN module.
Using your tablet 27