Owners Manual

b Display panel

3 To remove the heat sink assembly:

a Peel the conductive tapes that secure the shielding cover [1].

NOTE: Ensure to peel o the tape carefully, as any damage to the tape will need to raise a new order for conductive

tapes. The tape secures the IR camera cable from any damage. Ensure to x the tapes while installing or replacing the

component. Gently remove the 4 conductive tapes, so that the conductive tapes can be reused.

b Lift the shielding covers that secure the heat sink assembly [2,3].

NOTE: Peel the black tape / copper tape that secure the IR camera cable for model shipped with IR camera (optional).

4 To remove the heat sink assembly:

a Loosen the M2.0 x 2.5 captive screws that secure the heat sink assembly to the tablet [1].

NOTE

: Remove the screws in the order of the callout numbers [1, 2, 3, 4] as indicated on the heat sink.

b Lift the heat sink assembly from the tablet [2].

Using your tablet