Owners Manual

NOTE: uSIM card slot is available only on tablets shipping with WWAN module.

b display panel

3 To disconnect the cables:

a Disconnect the smart card cable from the smart card cage [1].

b Remove the M2.0 x 2.5 screws from the smart card module [2].

c Lift the smart card cage from the tablet [3].

Installing the smart card cage

1 Insert the smart cage into the slot on the tablet.

2 Replace the M2.0 x 2.5 screws screws to secure the smart card cage to the tablet.

3 Connect the smart cable to the smart card module.

4 Install the:

a display panel

b uSIM/microSD card

NOTE

: uSIM card is installed only on tablets shipping with WWAN module.

5 Follow the procedure in After working inside your tablet.

Using your tablet