Owners Manual

Docking board

Removing the docking board

1 Follow the procedure in Before working inside your tablet.

2 Remove the:

a uSIM/microSD card

NOTE: uSIM card slot is available only on tablets shipping with WWAN module.

b display panel

c battery

3 To release the docking board:

a Disconnect the docking board cable from the system board [1].

NOTE: The docking board FPC is obstructed by the speaker cable. Remove the right speaker rst from the system to

replace the docking board.

b Peel the docking board cable from the tablet [2].

c Remove the M2.0 x 2.0 screws securing the docking board bracket to the docking board [3].

d Lift the docking board from the tablet [4].

Lift the docking board after releasing the cable from the adhesive.

Installing the smart card cage

1 Insert the smart cage into the slot on the tablet.

2 Replace the M2.0 x 2.5 screws screws to secure the smart card cage to the tablet.

Using your tablet