Owners Manual

3 Connect the smart cable to the smart card module.

4 Install the:

a display panel

b uSIM/microSD card

NOTE: uSIM card is installed only on tablets shipping with WWAN module.

5 Follow the procedure in After working inside your tablet.

System Board

Removing system board

1 Follow the procedure in Before working inside your tablet.

2 Remove the:

a uSIM/microSD card

NOTE: Micro-SIM card slot is available only on tablets shipping with WWAN module.

b display panel

c battery

d SSD card

e system fan

f WLAN card

NOTE

: Remove the WWAN card (optional)

g front camera

h rear camera

i heat sink

3 Disconnect the following cables from the system board .

a docking board cable [1]

b speaker cable [2]

c USH board cable [3]

Using your tablet