Owners Manual

Removing the coin cell battery

Coin cell battery connector is located beneath the system board.

1 Follow the procedure in Before working inside your tablet.

2 Remove the:

a uSIM and/or microSD card

NOTE: uSIM card slot is available only on tablets shipping with WWAN module.

b display panel

c battery

d system board

3 To remove the coin cell battery:

a Disconnect the coin cell battery cable from the connector beneath the system board.

b Lift the coin cell battery from the tablet.

NOTE: If you can easily disconnect the coin cell battery cable from beneath the connector on the system board, you need

not remove the system board to remove the coin cell battery.

Installing the coin cell battery

1 Insert the coin cell battery to the slot on and ax it to the back cover.

2 Connect the coin cell battery cable to the connector beneath the system board.

3 Install the:

a battery

b display panel

c uSIM/microSD card

Using your tablet