Owners Manual
Installing the antenna module
1 Insert the antenna module into the slot on the back cover of the tablet.
2 Tighten the M1.6 x 3 screw to secure the antenna module.
3 Route the antenna cables to the routing channels.
4 Ax the tape and the conductive tapes to secure the antenna cables.
5 Install the:
a heat sink
b rear facing camera
c front facing camera
d system fan
e WLAN card
f SSD card
g battery
h display panel
i uSIM/microSD card
NOTE
: uSIM card is installed only on tablets shipping with WWAN module.
6 Follow the procedure in After working inside your tablet.
USH board
40
Using your tablet