Owners Manual

Removing the USH board

1 Follow the procedure in Before working inside your tablet.

2 Remove the:

a uSIM/microSD card

NOTE: uSIM card slot is available only on tablets shipping with WWAN module.

b display panel

c battery

d smart card cage

3 To disconnect the cables:

a Lift the shield from the connector on the USH board [1].

b Disconnect the NFC and ngerprint reader cables from the connectors on the USB board [2].

c Disconnect the USH board cable from the connector on the USH board [3]

d Remove the M2.0 x 2.5 screw that secures the USH board [4].

e Lift the USH board from the tablet [5].

Installing the USH board

1 Replace the USB board in the slot on the tablet.

2 Connect the M2.0 x 2.5 screw to secure the USH board

3 Connect the USH board cable to the connector on the USH board.

Using your tablet