Owners Manual

Table Of Contents
Next steps
1. Replace the base cover.
2. Replace the microSD card.
3. Follow the procedure in after working inside your computer
WWAN card
Removing the WWAN card
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the microSD card.
3. Remove the base cover.
4. Disconnect the battery cable from the connector on the system board.
Steps
1. Remove the single (M2x3) screw that secures the WWAN card bracket to the WWAN card [1].
2. Remove the WWAN card bracket from the WWAN card [2].
3. Disconnect the antenna cables from the WWAN card [3].
4. Slide and remove the WWAN card from the WWAN card slot. [4].
30
Disassembly and reassembly