Owners Manual

Next steps
1. Replace the coin cell battery.
2. Replace the system board.
NOTE: System board can be replaced with heatsink attached.
3. Replace the WWAN card.
4. Replace the WLAN card.
5. Replace the DC-in.
6. Replace the system fan.
7. Replace the memory module.
8. Replace the speaker.
9. Replace the battery.
10. Replace the base cover.
11. Replace the microSD card.
12. Follow the procedure in after working inside your computer.
Smart card reader board
Removing the smart card reader board
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the microSD card.
3. Remove the base cover.
4. Remove the battery.
5. Remove the speaker.
6. Remove the memory module.
7. Remove the system fan.
8. Remove the DC-in .
9. Remove the WLAN card.
10. Remove the WWAN card.
11. Remove the system board.
12. Remove the coin cell battery.
Steps
1. Unroute the smart card reader board cable.
92
Disassembly and reassembly